============================ YADRO Cinder Driver ============================ YADRO Cinder driver provides iSCSI and FC support for TATLIN.UNIFIED storages. Supported Functions ~~~~~~~~~~~~~~~~~~~~ Basic Functions --------------- * Create Volume * Delete Volume * Attach Volume * Detach Volume * Extend Volume * Create Volume from Volume (clone) * Create Image from Volume * Volume Migration (host assisted) Additional Functions -------------------- * Extend an Attached Volume * Thin Provisioning * Manage/Unmanage Volume * Image Cache * Multiattach * High Availability Configuration ~~~~~~~~~~~~~ Set up TATLIN.UNIFIED storage ----------------------------- You need to specify settings as described below for storage systems. For details about each setting, see the user's guide of the storage system. #. User account Create a storage account belonging to the admin user group. #. Pool Create a storage pool that is used by the driver. #. Ports Setup Ethernet or FC ports you want to export volumes to. #. Hosts Create storage hosts and set ports of the initiators. One host must correspond to one initiator. #. Host Group Create storage host group and add hosts created on the previous step to the host group. #. CHAP Authentication Set up CHAP credentials for iSCSI storage hosts (if CHAP is used). Set up YADRO Cinder Driver ------------------------------------ Add the following configuration to ``/etc/cinder/cinder.conf``: .. code-block:: ini [iscsi-1] volume_driver=cinder.volume.drivers.yadro.tatlin_iscsi.TatlinISCSIVolumeDriver san_ip= san_login= san_password= tat_api_retry_count= api_port= pool_name= export_ports=, host_group= max_resource_count= auth_method= chap_username= chap_password= or .. code-block:: ini [fc-1] volume_driver=cinder.volume.drivers.yadro.tatlin_fc.TatlinFCVolumeDriver san_ip= san_login= san_password= tat_api_retry_count= api_port= pool_name= export_ports=, host_group= max_resource_count= ``volume_driver`` Volume driver name. ``san_ip`` TATLIN.UNIFIED management IP address or FQDN. ``san_login`` TATLIN.UNIFIED user name. ``san_password`` TATLIN.UNIFIED user password. ``tat_api_retry_count`` Number of repeated requests to TATLIN.UNIFIED. ``api_port`` TATLIN.UNIFIED management port. Default: 443. ``pool_name`` TATLIN.UNIFIED name of pool for Cinder Volumes. ``export_ports`` Comma-separated data ports for volumes to be exported to. ``host_group`` TATLIN.UNIFIED host group name. ``max_resource_count`` Limit on the number of resources for TATLIN.UNIFIED. Default: 150 ``auth_method`` (only iSCSI) Authentication method: * ``CHAP`` — use CHAP authentication (default) ``chap_username``, ``chap_password`` (if ``auth_method=CHAP``) CHAP credentials to validate the initiator.