# # Copyright 2024 Centreon (http://www.centreon.com/) # # Centreon is a full-fledged industry-strength solution that meets # the needs in IT infrastructure and application monitoring for # service performance. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # package storage::hp::3par::ssh::mode::psu; use base qw(centreon::plugins::templates::counter); use strict; use warnings; use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold_ng); sub psu_long_output { my ($self, %options) = @_; return sprintf( "checking node '%s' power supply '%s'", $options{instance_value}->{node_id}, $options{instance_value}->{psu_id} ); } sub prefix_psu_output { my ($self, %options) = @_; return sprintf( "node '%s' power supply '%s' ", $options{instance_value}->{node_id}, $options{instance_value}->{psu_id} ); } sub set_counters { my ($self, %options) = @_; $self->{maps_counters_type} = [ { name => 'psu', type => 3, cb_prefix_output => 'prefix_psu_output', cb_long_output => 'psu_long_output', indent_long_output => ' ', message_multiple => 'All power supplies are ok', group => [ { name => 'global', type => 0 }, { name => 'ac', type => 0 }, { name => 'dc', type => 0 }, { name => 'fan', type => 0 }, { name => 'battery', type => 0 } ] } ]; $self->{maps_counters}->{global} = [ { label => 'status', type => 2, critical_default => '%{status} !~ /ok/i', set => { key_values => [ { name => 'status' }, { name => 'node_id' }, { name => 'psu_id' } ], output_template => 'status: %s', closure_custom_perfdata => sub { return 0; }, closure_custom_threshold_check => \&catalog_status_threshold_ng } } ]; foreach ('ac', 'dc', 'fan', 'battery') { $self->{maps_counters}->{$_} = [ { label => $_ . '-status', type => 2, critical_default => '%{status} !~ /ok/i', set => { key_values => [ { name => 'status' }, { name => 'node_id' }, { name => 'psu_id' } ], output_template => $_ . ' status: %s', closure_custom_perfdata => sub { return 0; }, closure_custom_threshold_check => \&catalog_status_threshold_ng } } ]; } push @{$self->{maps_counters}->{battery}}, { label => 'charge-remaining', nlabel => 'battery.charge.remaining.percent', set => { key_values => [ { name => 'capacity' }, { name => 'node_id' }, { name => 'psu_id' } ], output_template => 'remaining capacity: %.2f %%', closure_custom_perfdata => sub { my ($self, %options) = @_; $self->{output}->perfdata_add( nlabel => $self->{nlabel}, unit => '%', instances => ['node' . $self->{result_values}->{node_id}, 'psu' . $self->{result_values}->{psu_id}], value => sprintf('%.2f', $self->{result_values}->{capacity}), warning => $self->{perfdata}->get_perfdata_for_output(label => 'warning-' . $self->{thlabel}), critical => $self->{perfdata}->get_perfdata_for_output(label => 'critical-' . $self->{thlabel}), min => 0, max => 100 ); } } }, { label => 'charge-remaining-minutes', nlabel => 'battery.charge.remaining.minutes', set => { key_values => [ { name => 'time' }, { name => 'node_id' }, { name => 'psu_id' } ], output_template => 'remaining time: %s minutes', closure_custom_perfdata => sub { my ($self, %options) = @_; $self->{output}->perfdata_add( nlabel => $self->{nlabel}, unit => 'm', instances => ['node' . $self->{result_values}->{node_id}, 'psu' . $self->{result_values}->{psu_id}], value => sprintf('%s', $self->{result_values}->{time}), warning => $self->{perfdata}->get_perfdata_for_output(label => 'warning-' . $self->{thlabel}), critical => $self->{perfdata}->get_perfdata_for_output(label => 'critical-' . $self->{thlabel}), min => 0 ); } } }; } sub new { my ($class, %options) = @_; my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1); bless $self, $class; $options{options}->add_options(arguments => { 'filter-node-id:s' => { name => 'filter_node_id' }, 'filter-psu-id:s' => { name => 'filter_psu_id' } }); return $self; } sub manage_selection { my ($self, %options) = @_; my ($content) = $options{custom}->execute_command(commands => ['shownode -ps -verbose']); #---------------Node 0 PS 0---------------- #Node ID : 0 #Power Supply ID : 0 #Manufacturer : XYRATEX #Assembly Part : 682372-001 #Assembly Serial Number : 5CQLQAXXXXXXX1 #State : OK #Fan State : OK #Fan Speed : Low #AC State : OK #DC State : OK #Battery State : OK #Battery Detail State : normal #Battery Charge State : FullyCharged #Battery Charge Level(%) : 100 #Max Battery Life(mins) : 16 # #---------------Node 0 PS 1---------------- #Node ID : 0 #Power Supply ID : 1 #Manufacturer : XYRATEX #Assembly Part : 682372-001 #Assembly Serial Number : 5CQLQAXXXXXXX2 #State : OK #Fan State : OK #Fan Speed : Low #AC State : OK #DC State : OK #Battery State : OK #Battery Detail State : normal #Battery Charge State : FullyCharged #Battery Charge Level(%) : 100 #Max Battery Life(mins) : 16 $self->{psu} = {}; while ($content =~ /^(Node ID.*?)(?=Node ID|\Z$)/msig) { my $entry = $1; my ($node_id, $psu_id); $node_id = $1 if ($entry =~ /^Node\s+ID\s*:\s*(\S+)/msi); $psu_id = $1 if ($entry =~ /^Power\s+Supply\s+ID\s*:\s*(\S+)/msi); next if (!defined($node_id)); next if (defined($self->{option_results}->{filter_node_id}) && $self->{option_results}->{filter_node_id} ne '' && $node_id !~ /$self->{option_results}->{filter_node_id}/); next if (defined($self->{option_results}->{filter_psu_id}) && $self->{option_results}->{filter_psu_id} ne '' && $psu_id !~ /$self->{option_results}->{filter_psu_id}/); $self->{psu}->{ $node_id . ':' . $psu_id } = { node_id => $node_id, psu_id => $psu_id, global => { node_id => $node_id, psu_id => $psu_id }, ac => { node_id => $node_id, psu_id => $psu_id }, dc => { node_id => $node_id, psu_id => $psu_id }, fan => { node_id => $node_id, psu_id => $psu_id }, battery => { node_id => $node_id, psu_id => $psu_id }, }; $self->{psu}->{ $node_id . ':' . $psu_id }->{global}->{status} = $1 if ($entry =~ /^State\s*:\s*(\S+)/msi); $self->{psu}->{ $node_id . ':' . $psu_id }->{ac}->{status} = $1 if ($entry =~ /^AC\s+State\s*:\s*(\S+)/msi); $self->{psu}->{ $node_id . ':' . $psu_id }->{dc}->{status} = $1 if ($entry =~ /^DC\s+State\s*:\s*(\S+)/msi); $self->{psu}->{ $node_id . ':' . $psu_id }->{fan}->{status} = $1 if ($entry =~ /^Fan\s+State\s*:\s*(\S+)/msi); $self->{psu}->{ $node_id . ':' . $psu_id }->{battery}->{status} = $1 if ($entry =~ /^Battery\s+State\s*:\s*(\S+)/msi); $self->{psu}->{ $node_id . ':' . $psu_id }->{battery}->{capacity} = $1 if ($entry =~ /^Battery\s+Charge\s+Level.*?:\s*(\S+)/msi); $self->{psu}->{ $node_id . ':' . $psu_id }->{battery}->{time} = $1 if ($entry =~ /^Max\s+Battery\s+Life.*?:\s*(\S+)/msi); } if (scalar(keys %{$self->{psu}}) <= 0) { $self->{output}->add_option_msg(short_msg => "Couldn't get power supplies information"); $self->{output}->option_exit(); } } 1; __END__ =head1 MODE Check power supplies. =over 8 =item B<--filter-node-id> Filter nodes by ID (can be a regexp). =item B<--filter-psu-id> Filter power supplies by ID (can be a regexp). =item B<--unknown-status> Define the conditions to match for the status to be UNKNOWN. You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--warning-status> Define the conditions to match for the status to be WARNING. You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--critical-status> Define the conditions to match for the status to be CRITICAL (default: '%{status} !~ /ok/i'). You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--unknown-ac-status> Set unknown threshold for AC status. You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--warning-ac-status> Set warning threshold for AC status. You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--critical-ac-status> Set critical threshold for AC status (default: '%{status} !~ /ok/i'). You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--unknown-dc-status> Set unknown threshold for DC status. You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--warning-dc-status> Set warning threshold for DC status. You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--critical-dc-status> Set critical threshold for DC status (default: '%{status} !~ /ok/i'). You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--unknown-fan-status> Set unknown threshold for fan status. You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--warning-fan-status> Set warning threshold for fan status. You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--critical-fan-status> Set critical threshold for fan status (default: '%{status} !~ /ok/i'). You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--unknown-battery-status> Set unknown threshold for battery status. You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--warning-battery-status> Set warning threshold for battery status. You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--critical-battery-status> Set critical threshold for battery status (default: '%{status} !~ /ok/i'). You can use the following variables: %{status}, %{node_id}, %{psu_id} =item B<--warning-*> B<--critical-*> Thresholds. Can be: 'charge-remaining', 'charge-remaining-minutes. =back =cut