# # Copyright 2025 Centreon (http://www.centreon.com/) # # Centreon is a full-fledged industry-strength solution that meets # the needs in IT infrastructure and application monitoring for # service performance. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # package network::moxa::switch::snmp::mode::interfaces; use base qw(snmp_standard::mode::interfaces); use strict; use warnings; sub set_oids_status { my ($self, %options) = @_; $self->SUPER::set_oids_status(%options); # Standard duplex oid don't work on moxa industrial switches (eds405a) $self->{oid_duplexstatus} = '.1.3.6.1.4.1.8691.7.6.1.10.3.1.3'; # Moxa provide a specific oid for speed/duplex, with this values definition: # speed100M-Full(3), # speed100M-Half(2), # speed10M-Full(1), # speed10M-Half(0), # na(-1) $self->{oid_duplexstatus_mapping} = { -1 => 'unknown', 0 => 'halfDuplex', 2 => 'halfDuplex', 3 => 'fullDuplex',1 => 'fullDuplex' }; } sub new { my ($class, %options) = @_; my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1); bless $self, $class; return $self; } 1; __END__ =head1 MODE Check interfaces of moxa industrial switches. =over 8 =item B<--add-global> Check global port statistics (by default if no --add-* option is set). =item B<--add-status> Check interface status. =item B<--add-duplex-status> Check duplex status (with --warning-status and --critical-status). =item B<--add-traffic> Check interface traffic. =item B<--add-errors> Check interface errors. =item B<--add-cast> Check interface cast. =item B<--add-speed> Check interface speed. =item B<--add-volume> Check interface data volume between two checks (not supposed to be graphed, useful for BI reporting). =item B<--check-metrics> If the expression is true, metrics are checked (default: '%{opstatus} eq "up"'). =item B<--warning-status> Define the conditions to match for the status to be WARNING. You can use the following variables: %{admstatus}, %{opstatus}, %{duplexstatus}, %{display} =item B<--critical-status> Define the conditions to match for the status to be CRITICAL (default: '%{admstatus} eq "up" and %{opstatus} ne "up"'). You can use the following variables: %{admstatus}, %{opstatus}, %{duplexstatus}, %{display} =item B<--warning-*> B<--critical-*> Thresholds. Can be: 'total-port', 'total-admin-up', 'total-admin-down', 'total-oper-up', 'total-oper-down', 'in-traffic', 'out-traffic', 'in-error', 'in-discard', 'out-error', 'out-discard', 'in-ucast', 'in-bcast', 'in-mcast', 'out-ucast', 'out-bcast', 'out-mcast', 'speed' (b/s). =item B<--units-traffic> Units of thresholds for the traffic (default: 'percent_delta') ('percent_delta', 'bps', 'counter'). =item B<--units-errors> Units of thresholds for errors/discards (default: 'percent_delta') ('percent_delta', 'percent', 'delta', 'deltaps', 'counter'). =item B<--units-cast> Units of thresholds for communication types (default: 'percent_delta') ('percent_delta', 'percent', 'delta', 'deltaps', 'counter'). =item B<--nagvis-perfdata> Display traffic perfdata to be compatible with NagVis widget. =item B<--interface> Check only the interfaces with the specified IDs (OID indexes, e.g.: 1,2,...). If empty, all interfaces will be monitored. To filter on interface names, see --name. =item B<--name> With this option, the interfaces will be filtered by name (given in option --interface) instead of OID index. The name matching mode supports regular expressions. =item B<--regex-id> With this option, interface IDs will be filtered using the --interface parameter as a regular expression instead of a list of IDs. =item B<--speed> Set interface speed for incoming/outgoing traffic (in Mb). =item B<--speed-in> Set interface speed for incoming traffic (in Mb). =item B<--speed-out> Set interface speed for outgoing traffic (in Mb). =item B<--map-speed-dsl> Get interface speed configuration for interfaces of type 'ADSL' and 'VDSL2'. Syntax: --map-speed-dsl=interface-src-name,interface-dsl-name E.g: --map-speed-dsl=Et0.835,Et0-vdsl2 =item B<--force-counters64> Force to use 64 bits counters only. Can be used to improve performance. =item B<--force-counters32> Force to use 32-bit counters (even with SNMP versions 2c and 3). To use when 64 bits counters are buggy. =item B<--reload-cache-time> Time in minutes before reloading cache file (default: 180). =item B<--oid-filter> Define the OID to be used to filter interfaces (default: ifName) (values: ifDesc, ifAlias, ifName, IpAddr). =item B<--oid-display> Define the OID that will be used to name the interfaces (default: ifName) (values: ifDesc, ifAlias, ifName, IpAddr). =item B<--oid-extra-display> Add an OID to display. =item B<--display-transform-src> B<--display-transform-dst> Modify the interface name displayed by using a regular expression. Example: adding --display-transform-src='eth' --display-transform-dst='ens' will replace all occurrences of 'eth' with 'ens' =item B<--show-cache> Display cache interface data. =back =cut