+++ title = "Ditto, realistic instrument" weight = 11 +++ ### Polarized specular reflectometry with non-perfect polarizer and analyzer In this example, we show how to perform a specular reflectometry simulation with polarized neutrons and both a non-perfect polarizer as well as analyzer. The example is inspired by and performed with parameters close to the ones in [the paper by Devishvili et al.](https://doi.org/10.1063/1.4790717). This example is a saturated iron film on top of a MgO substrate. On top of the iron layer is a thin Pd cap layer. We don't explain the whole script in detail here, it combines all concepts that were introduced before in the polarized reflectometry section. Instrument resolution is simulated as explained in the [ToF - Resolution effects example](/ref/instr/scan/tof-resolution). Furthermore, a constant background is added: ```python simulation.setBackground( ba.ConstantBackground( 1e-7 ) ) ``` For a more detailed explanation we refer to the example on [adding a constant background](/ref/sim/setup/bg). The values for the efficiency of the polarizer and analyzer are taken from the above mentioned paper by [Devishvili et al.](https://doi.org/10.1063/1.4790717): ```python polarizer_efficiency = 0.986 analyzer_efficiency = 0.970 ``` These values are used to initialize the polarizer and analyzer: ```python simulation.setBeamPolarization(polarization * polarizer_efficiency) simulation.setAnalyzerProperties(analyzer, analyzer_efficiency, 0.5) ``` This setup is then utilized to simulate the four reflectivity channels ```python results_pp = run_simulation(polarization = R3(0, 1, 0), analyzer = R3(0, 1, 0), polarizer_efficiency = polarizer_efficiency, analyzer_efficiency = analyzer_efficiency ) results_mm = run_simulation(polarization = R3(0, -1, 0), analyzer = R3(0, -1, 0), polarizer_efficiency = polarizer_efficiency, analyzer_efficiency = analyzer_efficiency ) results_pm = run_simulation(polarization = R3(0, 1, 0), analyzer = R3(0, -1, 0), polarizer_efficiency = polarizer_efficiency, analyzer_efficiency = analyzer_efficiency ) results_mp = run_simulation(polarization = R3(0, -1, 0), analyzer = R3(0, 1, 0), polarizer_efficiency = polarizer_efficiency, analyzer_efficiency = analyzer_efficiency ) ``` The computed reflectivity looks like this: {{< galleryscg >}} {{< figscg src="/img/auto/specular/MagneticLayerImperfect.png" width="650px" caption="Reflectivity">}} {{< /galleryscg >}} Due to the different values for the polarizer and analyzer efficiency, we obtain different reflectivity curves for the two spin-flip channels. As one can verify, these results are in good agreement with the measurement as well as the simulations presented by [Devishvili et al.](https://doi.org/10.1063/1.4790717) Here is the complete example: {{< show-ex file="specular/MagneticLayerImperfect.py" >}}