| 1 |
.TH avrp 1 "28 September 1998" "Version 1.0 beta 3" |
| 2 |
.SH NAME |
| 3 |
avrp \- Atmel AVR programming software to use with Atmel's serial-port programmers |
| 4 |
.SH SYNOPSIS |
| 5 |
.B avrp |
| 6 |
[\-s <serial port>] [\-a <chip type>] [\-prv] [\-f <filename>] [\-e <filename>] |
| 7 |
[\-d <deffile>] [\-l <lockmode>] [\-\-enable <fuse>] [\-\-disable <fuse>] |
| 8 |
[\-\-version] [\-\-help] [\-qIh] |
| 9 |
.SH DESCRIPTION |
| 10 |
.B avrp |
| 11 |
works on serial-port programmers which use Atmel's communication protocol |
| 12 |
for serial-port programmers. These programmers can program AVR (and other) |
| 13 |
chips both in serial and parallel mode. |
| 14 |
.PP |
| 15 |
These programmers are known: |
| 16 |
AVR ICP \- Atmel In-circuit programmer |
| 17 |
AVR PPR \- Atmel parallel programmer |
| 18 |
AVR DEV \- Atmel development board |
| 19 |
AVR A.G \- Parallel mode programmer by Adrian Godwin |
| 20 |
.PP |
| 21 |
Adrian Godwin's programmer can be found on http://www.fangorn.demon.co.uk |
| 22 |
.PP |
| 23 |
Instruction on how to build Atmel's in-circuit programmer can be found on |
| 24 |
Atmel's homepage (http://www.atmel.com). Look for application note avr910 |
| 25 |
.PP |
| 26 |
avrp is currently supporting these systems: |
| 27 |
Linux |
| 28 |
FreeBSD |
| 29 |
AmigaOS |
| 30 |
win32 (windows 95++ and NT) |
| 31 |
.PP |
| 32 |
The source-code part of Atmel's application note AVR910 was used to determine |
| 33 |
how to communicate with these programmers. |
| 34 |
.PP |
| 35 |
.SH OPTIONS |
| 36 |
Several option can be given after one '\-', but if an option requires an |
| 37 |
argument; the argument must be given after that option. |
| 38 |
.IP "\-s <serial port>" |
| 39 |
Specifies which serial port to talk through. This option can be avoided if you |
| 40 |
set the environment variable AVRP_SERIALPORT |
| 41 |
.IP "\-a <chip type>" |
| 42 |
Specifies what kind of chip to talk to. Use '-a list' for chip type to get a list |
| 43 |
of supported devices. You can use the shortest possible abbreviation to |
| 44 |
identify a chip. This option can be avoided if you set the environment variable |
| 45 |
AVRP_AVRTYPE |
| 46 |
.IP \-p |
| 47 |
Program a chip \-f <filename> and/or \-e <filename> must be specified to determine |
| 48 |
which files to read from. (\-f specifes flash, and \-e eeprom) |
| 49 |
.IP \-r |
| 50 |
Read a chip \-f <filename> and/or \-e <filename> must be specified to determine |
| 51 |
which files to write to. (\-f specifes flash, and \-e eeprom) |
| 52 |
.IP \-v |
| 53 |
Verify. Performs a standalone verify. (The program function will always do a |
| 54 |
inline verify) \-f <filename> and/or \-e <filename> must be specified to determine |
| 55 |
which files to read from. (\-f specifes flash, and \-e eeprom) |
| 56 |
.IP "\-f <filename>" |
| 57 |
Specifies which flash-file to read/write. Supportet formats are Intel HEX and |
| 58 |
Atmel's generic fileformat. |
| 59 |
.IP "\-e <filename>" |
| 60 |
Specifies which eeprom-file to read/write. Supportet formats are Intel HEX and |
| 61 |
Atmel's generic fileformat. |
| 62 |
.IP "\-l <lockmode>" |
| 63 |
Specifies lockmode to progam into the chip. Use '-l list' to get a list of |
| 64 |
possible lockmodes. |
| 65 |
.IP \-q |
| 66 |
Quiet. Don't write any progress information. Will speed up programming. |
| 67 |
.IP "\-d <deffile>" |
| 68 |
Specifies the path and filename of avrp.def if default location is not possible. |
| 69 |
Can also be set with the environment variable AVRP_DEFFILE |
| 70 |
.IP \-I |
| 71 |
Ignores the signature in the chip. This is very useful if the signature in the |
| 72 |
chip have been destroyed in some way. |
| 73 |
.IP "\-\-enable <fuses>" |
| 74 |
Enables specified fuses. |
| 75 |
.IP "\-\-disable <fuses>" |
| 76 |
Disables specified fuses. |
| 77 |
.IP "\-\-autoinc" |
| 78 |
You can use this to speed up programming on newer programmer firmware. |
| 79 |
.IP \-\-version |
| 80 |
Print out version information. |
| 81 |
.IP "\-\-help \-h" |
| 82 |
Print out a short help text. |
| 83 |
.SH FILES |
| 84 |
.I /usr/local/etc/avrp.def |
| 85 |
.RS |
| 86 |
Definition file |
| 87 |
.RE |
| 88 |
.SH ENVIRONMENT |
| 89 |
.IP AVRP_SERIALPORT |
| 90 |
Specifies which serial port to use. |
| 91 |
.IP AVRP_AVRTYPE |
| 92 |
Specifies chip to talk to. |
| 93 |
.IP AVRP_DEFFILE |
| 94 |
Specifies the location of avrp.def |
| 95 |
.SH EXAMPLES |
| 96 |
Print out information on the programmer: |
| 97 |
avrp \-s /dev/ttyS1 |
| 98 |
|
| 99 |
Same as above, but also give information on the inserted chip: |
| 100 |
avrp \-s /dev/ttyS1 \-a AT90S1200-D/E/F |
| 101 |
|
| 102 |
Program a chip (flash only, and using a short chip-descriptor): |
| 103 |
avrp \-s /dev/ttyS1 \-a 1200-d \-p \-f avr910.rom |
| 104 |
|
| 105 |
Read a chip (flash and eeprom, AVRP_SERIALPORT is set): |
| 106 |
avrp \-a 8515 \-rf test.hex \-e test.eep.hex |
| 107 |
.SH COPYRIGHT |
| 108 |
Copyright (C) 1997-1998 Jon Anders Haugum |
| 109 |
|
| 110 |
This program is free software; you can redistribute it and/or modify |
| 111 |
it under the terms of the GNU General Public License as published by |
| 112 |
the Free Software Foundation; either version 2 of the License, or |
| 113 |
(at your option) any later version. |
| 114 |
|
| 115 |
This program is distributed in the hope that it will be useful, |
| 116 |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 117 |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 118 |
GNU General Public License for more details. |
| 119 |
|
| 120 |
You should have received a copy of the GNU General Public License |
| 121 |
along with this program; see the file COPYING. If not, write to |
| 122 |
the Free Software Foundation, Inc., 59 Temple Place \- Suite 330, |
| 123 |
Boston, MA 02111-1307, USA. |
| 124 |
.SH AUTHOR |
| 125 |
Jon Anders Haugum <[email protected]> |