# Copyright (c) 2014-2016 Carbonite, Inc. All Rights Reserved. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation; either version 2 # of the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY # or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License # for more details. # # You should have received a copy of the GNU General Public License along # with this program; if not, write to the Free Software Foundation, Inc., # 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # # Contact information: Carbonite Inc., 756 N Pastoria Ave # Sunnyvale, CA 94086, USA, or: http://www.zmanda.com use Test::More; use File::Path; use strict; use warnings; use lib '@amperldir@'; use Installcheck; use Installcheck::Dumpcache; use Installcheck::Config; use Installcheck::Run qw(run run_err $diskname amdump_diag check_amreport check_amstatus); use Installcheck::Catalogs; use Amanda::Paths; use Amanda::Device qw( :constants ); use Amanda::Debug; use Amanda::MainLoop; use Amanda::Config qw( :init :getconf config_dir_relative ); use Amanda::Changer; eval 'use Installcheck::Rest;'; if ($@) { plan skip_all => "Can't load Installcheck::Rest: $@"; exit 1; } eval "require Time::HiRes;"; # set up debugging so debug output doesn't interfere with test results Amanda::Debug::dbopen("installcheck"); Installcheck::log_test_output(); # and disable Debug's die() and warn() overrides Amanda::Debug::disable_die_override(); my $rest = Installcheck::Rest->new(); if ($rest->{'error'}) { plan skip_all => "Can't start JSON Rest server: $rest->{'error'}: see " . Amanda::Debug::dbfn(); exit 1; } plan tests => 84; my $reply; my $config_dir = $Amanda::Paths::CONFIG_DIR; my $amperldir = $Amanda::Paths::amperldir; my $testconf; my $diskfile; my $infodir; my $timestamp; my $tracefile; my $logfile; my $hostname = `hostname`; chomp $hostname; my $diskname2 = $diskname; my $diskname3 = "$diskname/AA"; my $diskname2X = sprintf "%-130s", $diskname2; my $diskname3X = sprintf "%-130s", $diskname3; my $diskname2S = ' ' x length($diskname2); my $diskname3S = ' ' x length($diskname3); my $disknameSS = ' ' x 130; $testconf = Installcheck::Run::setup(); Installcheck::Run::setup_storage($testconf, '1', 3, vault => '"storage-2" 0', runtapes => 3 ); Installcheck::Run::setup_storage($testconf, '2', 3, runtapes => 3 ); $testconf->add_param('columnspec', '"Disk=1:130:130"'); $testconf->add_param('storage', '"storage-1"'); $testconf->add_param('vault-storage', '"storage-2"'); $testconf->add_dle(<add_dle(<write(); config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF"); $diskfile = Amanda::Config::config_dir_relative(getconf($CNF_DISKFILE)); $infodir = getconf($CNF_INFOFILE); $reply = $rest->post("http://localhost:5001/amanda/v1.0/configs/TESTCONF/runs/amdump",""); foreach my $message (@{$reply->{'body'}}) { if (defined $message and defined $message->{'code'}) { if ($message->{'code'} == 2000003) { $timestamp = $message->{'timestamp'}; } if ($message->{'code'} == 2000001) { $tracefile = $message->{'tracefile'}; } if ($message->{'code'} == 2000000) { $logfile = $message->{'logfile'}; } } } #wait until it is done do { Time::HiRes::sleep(0.5); $reply = $rest->get("http://localhost:5001/amanda/v1.0/configs/TESTCONF/runs"); } while ($reply->{'body'}[0]->{'code'} == 2000004 and $reply->{'body'}[0]->{'status'} ne 'done'); # get REST report $reply = $rest->get("http://localhost:5001/amanda/v1.0/configs/TESTCONF/report?logfile=$logfile"); is($reply->{'body'}->[0]->{'severity'}, 'success', 'severity is success'); is($reply->{'body'}->[0]->{'code'}, '1900001', 'code is 1900001'); is($reply->{'body'}->[0]->{'report'}->{'head'}->{'hostname'}, $hostname , 'hostname is correct'); is($reply->{'body'}->[0]->{'report'}->{'head'}->{'exit_status'}, '0' , 'exit_status is correct'); is($reply->{'body'}->[0]->{'report'}->{'head'}->{'status'}, 'done' , 'status is correct'); is($reply->{'body'}->[0]->{'report'}->{'head'}->{'org'}, 'DailySet1' , 'org is correct'); is($reply->{'body'}->[0]->{'report'}->{'head'}->{'config_name'}, 'TESTCONF' , 'config_name is correct'); is($reply->{'body'}->[0]->{'report'}->{'head'}->{'timestamp'}, $timestamp , 'timestamp is correct'); is($reply->{'body'}->[0]->{'report'}->{'notes'}->[1], " planner: Adding new disk localhost:$diskname2." , 'notes[1] is correct') || diag("notes: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'notes'})); is($reply->{'body'}->[0]->{'report'}->{'notes'}->[2], " planner: Adding new disk localhost:$diskname3." , 'notes[2] is correct') || diag("notes: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'notes'})); is($reply->{'body'}->[0]->{'report'}->{'notes'}->[3], ' taper: Slot 1 without label can be labeled' , 'notes[3] is correct') || diag("notes: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'notes'})); is($reply->{'body'}->[0]->{'report'}->{'notes'}->[4], ' taper: tape STO-1-00001 kb 1050 fm 1 [OK]' , 'notes[4] is correct') || diag("notes: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'notes'})); is($reply->{'body'}->[0]->{'report'}->{'notes'}->[5], ' taper: Slot 2 without label can be labeled' , 'notes[5] is correct') || diag("notes: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'notes'})); is($reply->{'body'}->[0]->{'report'}->{'notes'}->[6], ' taper: tape STO-1-00002 kb 1050 fm 1 [OK]' , 'notes[6] is correct') || diag("notes: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'notes'})); is($reply->{'body'}->[0]->{'report'}->{'notes'}->[7], ' taper: Slot 1 without label can be labeled' , 'notes[7] is correct') || diag("notes: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'notes'})); is($reply->{'body'}->[0]->{'report'}->{'notes'}->[8], ' taper: tape STO-2-00001 kb 1050 fm 1 [OK]' , 'notes[8] is correct') || diag("notes: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'notes'})); is($reply->{'body'}->[0]->{'report'}->{'notes'}->[9], ' taper: Slot 2 without label can be labeled' , 'notes[9] is correct') || diag("notes: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'notes'})); is($reply->{'body'}->[0]->{'report'}->{'notes'}->[10], ' taper: tape STO-2-00002 kb 1050 fm 1 [OK]' , 'notes[10] is correct') || diag("notes: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'notes'})); ok(!exists $reply->{'body'}->[0]->{'report'}->{'notes'}->[11], 'no notes[11]') || diag("notes: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'notes'})); ok(!exists $reply->{'body'}->[0]->{'report'}->{'failure_summary'}, 'no failure_summary'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[0]->{'nb'}, '1' , 'one dle on tape 0'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[0]->{'nc'}, '1' , 'one part on tape 0'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[0]->{'tape_label'}, 'STO-1-00001' , 'label tape_label on tape 0'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[0]->{'size'}, '1050' , 'size 1050 on tape 0'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[1]->{'nb'}, '1' , 'one dle on tape 0'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[1]->{'nc'}, '1' , 'one part on tape 0'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[1]->{'tape_label'}, 'STO-1-00002' , 'label tape_label on tape 1'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[1]->{'size'}, '1050' , 'size 1050 on tape 0'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[2]->{'nb'}, '1' , 'one dle on tape 0'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[2]->{'nc'}, '1' , 'one part on tape 0'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[2]->{'tape_label'}, 'STO-2-00001' , 'label tape_label on tape 0'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[2]->{'size'}, '1050' , 'size 1050 on tape 0'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[3]->{'nb'}, '1' , 'one dle on tape 0'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[3]->{'nc'}, '1' , 'one part on tape 0'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[3]->{'tape_label'}, 'STO-2-00002' , 'label tape_label on tape 1'); is($reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[3]->{'size'}, '1050' , 'size 1050 on tape 0'); ok(!exists $reply->{'body'}->[0]->{'report'}->{'usage_by_tape'}->[4], '4 tapes used'); is_deeply($reply->{'body'}->[0]->{'report'}->{'tapeinfo'}->{'storage'}->{'storage-1'}->{'use'}, [ 'STO-1-00001', 'STO-1-00002'], 'use storage-1'); is_deeply($reply->{'body'}->[0]->{'report'}->{'tapeinfo'}->{'storage'}->{'storage-2'}->{'use'}, [ 'STO-2-00001', 'STO-2-00002'], 'use storage-2') or diag ("storage: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'tapeinfo'}->{'storage'})); is_deeply($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'tape_size'}, { 'full' => '4200', 'total' => '4200', 'incr' => '0' }, 'tape_size is correct'); is_deeply($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'parts_taped'}, { 'full' => '4', 'total' => '4', 'incr' => '0' }, 'parts_taped is correct'); is_deeply($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'dles_taped'}, { 'full' => '4', 'total' => '4', 'incr' => '0' }, 'dles_taped is correct'); is_deeply($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'dles_dumped'}, { 'full' => '2', 'total' => '2', 'incr' => '0' }, 'dles_dumped is correct'); is_deeply($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'original_size'}, { 'full' => '2100', 'total' => '2100', 'incr' => '0' }, 'original_size is correct'); is_deeply($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'output_size'}, { 'full' => '2100', 'total' => '2100', 'incr' => '0' }, 'output_size is correct'); is($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'dumpdisks'}, '', 'dumpdisks is correct'); is($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'tapedisks'}, '', 'tapedisks is correct'); is($reply->{'body'}->[0]->{'report'}->{'statistic'}->{'tapeparts'}, '', 'tapeparts is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[0]->{'backup_level'}, '0', 'backup_level is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[0]->{'disk_name'}, "$diskname2", 'disk_name is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[0]->{'hostname'}, 'localhost', 'hostname is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[0]->{'dump_orig_kb'}, '1050', 'dump_orig_kb is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[0]->{'dump_out_kb'}, '1050', 'dump_out_kb is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[0]->{'dle_status'}, 'full', 'dle_status is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[1]->{'backup_level'}, '', 'backup_level is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[1]->{'disk_name'}, "", 'disk_name is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[1]->{'hostname'}, '', 'hostname is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[1]->{'dump_orig_kb'}, '', 'dump_orig_kb is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[1]->{'dump_out_kb'}, '', 'dump_out_kb is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[1]->{'dle_status'}, 'nodump-VAULT', 'dle_status is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[2]->{'backup_level'}, '0', 'backup_level is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[2]->{'disk_name'}, "$diskname3", 'disk_name is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[2]->{'hostname'}, 'localhost', 'hostname is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[2]->{'dump_orig_kb'}, '1050', 'dump_orig_kb is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[2]->{'dump_out_kb'}, '1050', 'dump_out_kb is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[2]->{'dle_status'}, 'full', 'dle_status is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[3]->{'backup_level'}, '', 'backup_level is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[3]->{'disk_name'}, "", 'disk_name is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[3]->{'hostname'}, '', 'hostname is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[3]->{'dump_orig_kb'}, '', 'dump_orig_kb is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[3]->{'dump_out_kb'}, '', 'dump_out_kb is correct'); is($reply->{'body'}->[0]->{'report'}->{'summary'}->[3]->{'dle_status'}, 'nodump-VAULT', 'dle_status is correct'); ok(!exists $reply->{'body'}->[0]->{'report'}->{'summary'}->[9], 'four summary') or diag("summary: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'report'}->{'summary'})); $reply = $rest->get("http://localhost:5001/amanda/v1.0/configs/TESTCONF/status?tracefile=$tracefile"); is($reply->{'body'}->[0]->{'severity'}, 'info', 'severity is info'); is($reply->{'body'}->[0]->{'code'}, '1800000', 'code is 1800000'); is($reply->{'body'}->[0]->{'status'}->{'dead_run'}, '1', 'dead_run is correct'); is($reply->{'body'}->[0]->{'status'}->{'exit_status'}, '0', 'exit_status is correct'); $reply->{'body'}->[0]->{'status'}->{'dles'}->{'localhost'}->{$diskname2}->{$timestamp}->{'chunk_time'} = undef; $reply->{'body'}->[0]->{'status'}->{'dles'}->{'localhost'}->{$diskname2}->{$timestamp}->{'dump_time'} = undef; $reply->{'body'}->[0]->{'status'}->{'dles'}->{'localhost'}->{$diskname3}->{$timestamp}->{'chunk_time'} = undef; $reply->{'body'}->[0]->{'status'}->{'dles'}->{'localhost'}->{$diskname3}->{$timestamp}->{'dump_time'} = undef; $reply->{'body'}->[0]->{'status'}->{'dles'}->{'localhost'}->{$diskname2}->{$timestamp}->{'storage'}->{'storage-1'}->{'taper_time'} = undef; $reply->{'body'}->[0]->{'status'}->{'dles'}->{'localhost'}->{$diskname2}->{$timestamp}->{'storage'}->{'storage-2'}->{'taper_time'} = undef; $reply->{'body'}->[0]->{'status'}->{'dles'}->{'localhost'}->{$diskname3}->{$timestamp}->{'storage'}->{'storage-1'}->{'taper_time'} = undef; $reply->{'body'}->[0]->{'status'}->{'dles'}->{'localhost'}->{$diskname3}->{$timestamp}->{'storage'}->{'storage-2'}->{'taper_time'} = undef; is_deeply($reply->{'body'}->[0]->{'status'}->{'dles'}, { 'localhost' => { $diskname2 => { $timestamp => { 'taped' => '1', 'retry' => '0', 'size' => '1075200', 'esize' => '1075200', 'retry_level' => '-1', #'message' => 'dump to tape done', 'chunk_time' => undef, 'dsize' => '1075200', 'status' => '28', #'partial' => '0', 'level' => '0', 'dump_time' => undef, 'degr_level' => '-1', 'storage' => { 'storage-1' => { 'will_retry' => '0', 'status' => '21', 'dsize' => '1075200', 'taper_time' => undef, 'taped_size' => '1075200', 'message' => 'dump to tape done', 'size' => '1075200', 'partial' => '0' }, 'storage-2' => { 'will_retry' => '0', 'status' => '28', 'dsize' => '1075200', 'taper_time' => undef, 'taped_size' => '1075200', 'message' => 'vaulted', 'size' => '1075200', 'partial' => '0', 'vaulting' =>'1', 'src_storage' => 'storage-1', 'src_label' => 'STO-1-00002', 'src_pool' => 'POOL-1', } }, 'dump_to_tape_storage' => 'storage-1', 'flush' => '0', 'will_retry' => '0' } }, $diskname3 => { $timestamp => { 'taped' => '1', 'retry' => '0', 'size' => '1075200', 'esize' => '1075200', 'retry_level' => '-1', #'message' => 'dump to tape done', 'chunk_time' => undef, 'dsize' => '1075200', 'status' => '28', #'partial' => '0', 'level' => '0', 'dump_time' => undef, 'degr_level' => '-1', 'storage' => { 'storage-1' => { 'will_retry' => '0', 'status' => '21', 'dsize' => '1075200', 'taper_time' => undef, 'taped_size' => '1075200', 'message' => 'dump to tape done', 'size' => '1075200', 'partial' => '0' }, 'storage-2' => { 'will_retry' => '0', 'status' => '28', 'dsize' => '1075200', 'taper_time' => undef, 'taped_size' => '1075200', 'message' => 'vaulted', 'size' => '1075200', 'partial' => '0', 'vaulting' =>'1', 'src_storage' => 'storage-1', 'src_label' => 'STO-1-00001', 'src_pool' => 'POOL-1', } }, 'dump_to_tape_storage' => 'storage-1', 'flush' => '0', 'will_retry' => '0' } } } }, 'dles is correct'); is_deeply($reply->{'body'}->[0]->{'status'}->{'taper'}, { 'taper0' => { 'worker' => { 'worker0-0' => { 'status' => '0', 'no_tape' => '1' } }, 'tape_size' => '31457280', 'storage' => 'storage-1', 'nb_tape' => '2', 'stat' => [ { 'size' => '1075200', 'esize' => '1075200', 'nb_dle' => '1', 'nb_part' => '1', 'label' => 'STO-1-00001', 'percent' => '3.41796875' }, { 'size' => '1075200', 'esize' => '1075200', 'nb_dle' => '1', 'nb_part' => '1', 'label' => 'STO-1-00002', 'percent' => '3.41796875' } ] }, 'taper1' => { 'worker' => { 'worker1-0' => { 'status' => '0', 'no_tape' => '1', 'message' => 'Idle' } }, 'tape_size' => '31457280', 'storage' => 'storage-2', 'nb_tape' => '2', 'stat' => [ { 'size' => '1075200', 'esize' => '1075200', 'nb_dle' => '1', 'nb_part' => '1', 'label' => 'STO-2-00001', 'percent' => '3.41796875' }, { 'size' => '1075200', 'esize' => '1075200', 'nb_dle' => '1', 'nb_part' => '1', 'label' => 'STO-2-00002', 'percent' => '3.41796875' } ] } }, 'taper is correct') or diag("taper: " . Data::Dumper::Dumper($reply->{'body'}->[0]->{'status'}->{'taper'})); is($reply->{'body'}->[0]->{'status'}->{'storage'}->{'storage-1'}->{'taper'}, 'taper0', 'taper is correct'); is($reply->{'body'}->[0]->{'status'}->{'storage'}->{'storage-2'}->{'taper'}, 'taper1', 'taper is correct'); is_deeply($reply->{'body'}->[0]->{'status'}->{'stat'}, { 'flush' => { 'name' => 'flush' }, 'writing_to_tape' => { 'name' => 'writing to tape' }, 'wait_for_dumping' => { 'name' => 'wait for dumping', 'real_size' => undef, 'estimated_stat' => '0', 'nb' => '0', 'estimated_size' => '0' }, 'failed_to_tape' => { 'name' => 'failed to tape' }, 'dumping_to_tape' => { 'name' => 'dumping to tape', 'estimated_stat' => '0', 'real_size' => '0', 'real_stat' => '0', 'estimated_size' => '0', 'nb' => '0' }, 'wait_for_writing' => { 'name' => 'wait for writing' }, 'wait_to_flush' => { 'name' => 'wait_to_flush' }, 'dump_failed' => { 'name' => 'dump failed', 'estimated_stat' => '0', 'real_size' => undef, 'nb' => '0', 'estimated_size' => '0' }, 'estimated' => { 'name' => 'estimated', 'real_size' => undef, 'estimated_size' => '2150400', 'nb' => '2' }, 'taped' => { 'name' => 'taped', 'estimated_size' => '2150400', 'storage' => { 'storage-1' => { 'estimated_stat' => '100', 'real_size' => '2150400', 'nb' => '2', 'real_stat' => '100', 'estimated_size' => '2150400' }, 'storage-2' => { 'estimated_stat' => '100', 'real_size' => '2150400', 'nb' => '2', 'real_stat' => '100', 'estimated_size' => '2150400' } }, }, 'dumped' => { 'name' => 'dumped', 'estimated_stat' => '100', 'real_size' => '2150400', 'nb' => '2', 'real_stat' => '100', 'estimated_size' => '2150400' }, 'disk' => { 'name' => 'disk', 'nb' => '2', 'estimated_size' => undef, 'real_size' => undef }, 'dumping' => { 'name' => 'dumping', 'nb' => '0', 'real_stat' => '0', 'estimated_size' => '0', 'real_size' => '0', 'estimated_stat' => '0' }, 'wait_to_vault' => { 'name' => 'wait_to_vault' }, 'vaulting' => { 'name' => 'vaulting' }, 'vaulted' => { 'name' => 'vaulted', 'nb' => '2', 'estimated_size' => '2150400', 'real_size' => '2150400', } }, 'stat is correct'); # amreport my $report = <<"END_REPORT"; Hostname: localhost.localdomain Org : DailySet1 Config : TESTCONF Date : June 21, 2016 These dumps to storage 'storage-1' were to tapes STO-1-00001, STO-1-00002. These dumps to storage 'storage-2' were to tapes STO-2-00001, STO-2-00002. The next 3 tapes Amanda expects to use for storage 'storage-1' are: 1 new tape, STO-1-00001, STO-1-00002. The next 3 tapes Amanda expects to use for storage 'storage-2' are: 1 new tape, STO-2-00001, STO-2-00002. STATISTICS: Total Full Incr. Level:# -------- -------- -------- -------- Estimate Time (hrs:min) 0:00 Run Time (hrs:min) 0:00 Dump Time (hrs:min) 0:00 0:00 0:00 Output Size (meg) 2.1 2.1 0.0 Original Size (meg) 2.1 2.1 0.0 Avg Compressed Size (%) 100.0 100.0 -- DLEs Dumped 2 2 0 Avg Dump Rate (k/s) 999999.9 999999.9 *-- Tape Time (hrs:min) 0:00 0:00 0:00 Tape Size (meg) 4.1 4.1 0.0 Tape Used (%) 13.8 13.8 0.0 DLEs Taped 4 4 0 Parts Taped 4 4 0 Avg Tp Write Rate (k/s) 999999.9 999999.9 *-- USAGE BY TAPE: Label Time Size % DLEs Parts STO-1-00001 0:00 1050K 3.4 1 1 STO-1-00002 0:00 1050K 3.4 1 1 STO-2-00001 0:00 1050K 3.4 1 1 STO-2-00002 0:00 1050K 3.4 1 1 NOTES: planner: tapecycle (2) <= runspercycle (10) planner: Adding new disk localhost:$diskname2. planner: Adding new disk localhost:$diskname3. taper: Slot 1 without label can be labeled taper: tape STO-1-00001 kb 1050 fm 1 [OK] taper: Slot 2 without label can be labeled taper: tape STO-1-00002 kb 1050 fm 1 [OK] taper: Slot 1 without label can be labeled taper: tape STO-2-00001 kb 1050 fm 1 [OK] taper: Slot 2 without label can be labeled taper: tape STO-2-00002 kb 1050 fm 1 [OK] DUMP SUMMARY: DUMPER STATS TAPER STATS HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s ------------------------------------------------------------------------------------------------------------------------------------------------- ---------------------- -------------- -------------- localhost $diskname2X 0 1050 1050 -- 0:00 999999.9 0:00 999999.9 $disknameSS VAULT 0:00 999999.9 localhost $diskname3X 0 1050 1050 -- 0:00 999999.9 0:00 999999.9 $disknameSS VAULT 0:00 999999.9 (brought to you by Amanda version x.y.z) END_REPORT check_amreport($report, $timestamp, "amreport first amdump"); # amstatus my $status = <<"END_STATUS"; Using: /amanda/h1/etc/amanda/TESTCONF/log/amdump.1 From Wed Jun 22 08:01:00 EDT 2016 localhost:$diskname2 $timestamp 0 1050k (storage-1) dump to tape done (00:00:00) $diskname2S (storage-2) vaulted (00:00:00) localhost:$diskname3 $timestamp 0 1050k (storage-1) dump to tape done (00:00:00) $diskname3S (storage-2) vaulted (00:00:00) SUMMARY dle real estimated size size ---------------- ---- --------- --------- disk : 2 estimated : 2 2100k flush dump failed : 0 0k ( 0.00%) wait for dumping: 0 0k ( 0.00%) dumping to tape : 0 0k 0k ( 0.00%) ( 0.00%) dumping : 0 0k 0k ( 0.00%) ( 0.00%) dumped : 2 2100k 2100k (100.00%) (100.00%) wait for writing wait to flush writing to tape dumping to tape failed to tape taped storage-1 : 2 2100k 2100k (100.00%) (100.00%) tape 1 : 1 1050k 1050k ( 3.42%) STO-1-00001 (1 parts) tape 2 : 1 1050k 1050k ( 3.42%) STO-1-00002 (1 parts) storage-2 : 2 2100k 2100k (100.00%) (100.00%) tape 1 : 1 1050k 1050k ( 3.42%) STO-2-00001 (1 parts) tape 2 : 1 1050k 1050k ( 3.42%) STO-2-00002 (1 parts) 2 dumpers idle : no-dumpers storage-1 qlen: 0 0: storage-2 qlen: 0 0: Idle network free kps: 80000 holding space : 25k (100.00%) dumper0 busy : 00:00:00 ( 52.93%) storage-1 busy : 00:00:00 ( 53.46%) storage-2 busy : 00:00:00 (199.47%) 0 dumpers busy : 00:00:00 ( 98.99%)no-dumpers: 00:00:00 ( 68.19%) 1 dumper busy : 00:00:00 ( 1.01%) END_STATUS check_amstatus($status, $tracefile, "amstatus first amdump"); #diag("reply: " . Data::Dumper::Dumper($reply)); #$rest->stop(); #exit; $rest->stop(); #Installcheck::Run::cleanup();