# FreeRadius Wireless Pawn Edition Updated patch for FreeRadius 3.2.2 More information about WPE can be found: https://www.willhackforsushi.com/?page_id=37 Supported and tested EAP Types/Inner Authentication Methods (others may also work): * PEAP/PAP (OTP) * PEAP/MSCHAPv2 * EAP-TTLS/PAP (includes OTPs) * EAP-TTLS/MSCHAPv1 * EAP-TTLS/MSCHAPv2 * EAP-MD5 ## Installing ### Dependencies ``` apt install libssl-dev build-essential libtalloc-dev libpcre3-dev ``` ### Optional dependencies ``` apt install libsqlite3-dev libhiredis-dev libykclient-dev libyubikey-dev default-libmysqlclient-dev libcurl4-openssl-dev libperl-dev libpam0g-dev libcap-dev libmemcached-dev libgdbm-dev unixodbc-dev libpq-dev libwbclient-dev libkrb5-dev libjson-c-dev freetds-dev libwbclient-sssd-dev samba-dev libcollectdclient-dev libldap-dev ``` ### Compilation Run the following commands: ``` wget ftp://ftp.freeradius.org/pub/freeradius/freeradius-server-3.2.2.tar.bz2 tar -xjf freeradius-server-3.2.2.tar.bz2 cd freeradius-server-3.2.2/ wget https://raw.githubusercontent.com/aircrack-ng/aircrack-ng/master/patches/wpe/freeradius-wpe/freeradius-server-3.2.2-wpe.diff patch -Np1 -i freeradius-server-3.2.2-wpe.diff ./configure make make install ldconfig ``` ## Running Start ```radiusd``` in a terminal: ``` radiusd -s -X ``` If it fails running and complains about OpenSSL being vulnerable, make sure OpenSSL is up to date. If you are using a recent distribution, most likely OpenSSL is patched, and you can safely allow it. In order to do so, edit /usr/local/etc/raddb/radiusd.conf and change ```allow_vulnerable_openssl``` from ```no``` to ```'CVE-2016-6304'``` (with the single quotes). Now, connect a client. Once a username/password is entered and the certificate accepted, information regarding that session will be stored in ```/usr/local/var/log/radius/freeradius-server-wpe.log```. **Note**: This file won't be created until the first client connects and authenticates to the access point.