// SPDX-License-Identifier: GPL-2.0 accel-config config-user-default(1) =================================== NAME ---- accel-config-config-user-default - load a pre-defined user default configuration SYNOPSIS -------- [verse] 'accel-config config-user-default' [] Without an option, config-user-default loads a pre-defined user default configuration. There is a config file template at contrib/configs/user_default_profile.conf. Run "accel-config config-user-default -c user_default_profile.conf" to configure all available devices with the template values. Any modifications to the template file should retain the json format. EXAMPLE ------- # accel-config config-user-default The command will load the pre-defined user default config to all available WQs and engines on all available DSA and IAX devices with the following attributes: All WQs and all engines are in group 0 WQ attributes: priority: 1 group_id: 0 block_on_fault: 1 ats_disable: 0 prs_disable: 1 mode: "shared" type: "user" name: "user_default_wq" driver_name: "user" size: max WQ size / max WQs threshold: size max_transfer_size: default value max_batch_size: default value on DSA. N/A on IAX op_config: default value Attributes of all devices and groups are default values. # accel-config config-user-default -c /etc/accel-config/contrib/configs/user_default_profile.conf The command will load the specified user default config file. The config file is a template that specifies attributes and devices. User can edit the config file per requirements. # accel-config config-user-default -d -n The command will disable all WQs named (default name is "user_default_wq"). OPTIONS ------- -c:: --config-file:: to specify the location of the customized user default config file -n:: --name:: to specify WQ name which will be used to disable enabled WQs -d:: --disable:: to disable the configured devices and wqs -v:: --verbose:: verbose