# --- BEGIN COPYRIGHT BLOCK --- # Copyright (C) 2017 Red Hat, Inc. # All rights reserved. # # License: GPL (version 3 or any later version). # See LICENSE for details. # --- END COPYRIGHT BLOCK --- # import pytest import subprocess from lib389.tasks import * from lib389.utils import * from test389.topologies import topology_st, topology_m1c1 from lib389.idm.user import (UserAccount, UserAccounts) from lib389.plugins import (AccountPolicyPlugin, AccountPolicyConfig, AccountPolicyConfigs) from lib389.cos import (CosTemplate, CosPointerDefinition) from lib389._constants import (PLUGIN_ACCT_POLICY, DN_PLUGIN, DN_DM, PASSWORD, DEFAULT_SUFFIX, DN_CONFIG, SERVERID_STANDALONE) pytestmark = pytest.mark.tier1 LOCL_CONF = 'cn=AccountPolicy1,ou=people,dc=example,dc=com' TEMPL_COS = 'cn=TempltCoS,ou=people,dc=example,dc=com' DEFIN_COS = 'cn=DefnCoS,ou=people,dc=example,dc=com' ACCPOL_DN = "cn={},{}".format(PLUGIN_ACCT_POLICY, DN_PLUGIN) ACCP_CONF = "{},{}".format(DN_CONFIG, ACCPOL_DN) USER_PASW = 'Secret1234' INVL_PASW = 'Invalid234' @pytest.fixture(scope="module") def accpol_global(topology_st, request): """Configure Global account policy plugin and restart the server""" log.info('Configuring Global account policy plugin, pwpolicy attributes and restarting the server') plugin = AccountPolicyPlugin(topology_st.standalone) try: if DEBUGGING: topology_st.standalone.config.set('nsslapd-auditlog-logging-enabled', 'on') plugin.enable() plugin.set('nsslapd-pluginarg0', ACCP_CONF) accp = AccountPolicyConfig(topology_st.standalone, dn=ACCP_CONF) accp.set('alwaysrecordlogin', 'yes') accp.set('stateattrname', 'lastLoginTime') accp.set('altstateattrname', 'createTimestamp') accp.set('specattrname', 'acctPolicySubentry') accp.set('limitattrname', 'accountInactivityLimit') accp.set('accountInactivityLimit', '12') topology_st.standalone.config.set('passwordexp', 'on') topology_st.standalone.config.set('passwordmaxage', '400') topology_st.standalone.config.set('passwordwarning', '1') topology_st.standalone.config.set('passwordlockout', 'on') topology_st.standalone.config.set('passwordlockoutduration', '5') topology_st.standalone.config.set('passwordmaxfailure', '3') topology_st.standalone.config.set('passwordunlock', 'on') except ldap.LDAPError as e: log.error('Failed to enable Global Account Policy Plugin and Password policy attributes') raise e topology_st.standalone.restart(timeout=10) def fin(): log.info('Disabling Global accpolicy plugin and removing pwpolicy attrs') try: plugin = AccountPolicyPlugin(topology_st.standalone) plugin.disable() topology_st.standalone.config.set('passwordexp', 'off') topology_st.standalone.config.set('passwordlockout', 'off') except ldap.LDAPError as e: log.error('Failed to disable Global accpolicy plugin, {}'.format(e.message['desc'])) assert False topology_st.standalone.restart(timeout=10) request.addfinalizer(fin) @pytest.fixture(scope="module") def accpol_local(topology_st, accpol_global, request): """Configure Local account policy plugin for ou=people subtree and restart the server""" log.info('Adding Local account policy plugin configuration entries') try: topology_st.standalone.config.set('passwordmaxage', '400') accp = AccountPolicyConfig(topology_st.standalone, dn=ACCP_CONF) accp.remove_all('accountInactivityLimit') locl_conf = AccountPolicyConfig(topology_st.standalone, dn=LOCL_CONF) locl_conf.create(properties={'cn': 'AccountPolicy1', 'accountInactivityLimit': '10'}) cos_template = CosTemplate(topology_st.standalone, dn=TEMPL_COS) cos_template.create(properties={'cn': 'TempltCoS', 'acctPolicySubentry': LOCL_CONF}) cos_def = CosPointerDefinition(topology_st.standalone, dn=DEFIN_COS) cos_def.create(properties={ 'cn': 'DefnCoS', 'cosTemplateDn': TEMPL_COS, 'cosAttribute': 'acctPolicySubentry default operational-default'}) except ldap.LDAPError as e: log.error('Failed to configure Local account policy plugin') log.error('Failed to add entry {}, {}, {}:'.format(LOCL_CONF, TEMPL_COS, DEFIN_COS)) raise e topology_st.standalone.restart(timeout=10) def fin(): log.info('Disabling Local accpolicy plugin and removing pwpolicy attrs') try: topology_st.standalone.plugins.disable(name=PLUGIN_ACCT_POLICY) for entry_dn in [LOCL_CONF, TEMPL_COS, DEFIN_COS]: entry = UserAccount(topology_st.standalone, dn=entry_dn) entry.delete() except ldap.LDAPError as e: log.error('Failed to disable Local accpolicy plugin, {}'.format(e.message['desc'])) assert False topology_st.standalone.restart(timeout=10) request.addfinalizer(fin) @pytest.fixture(scope="module") def setup_account_policy_plugin(topology_st): inst = topology_st[0] # Enable plugin and restart plugin = AccountPolicyPlugin(inst) plugin.disable() plugin.enable() inst.restart() # Add config entry, set alwaysrecordlogin to yes (lastLoginHistorySize defaults to 5) ap_configs = AccountPolicyConfigs(inst) try: ap_config = ap_configs.create(properties={'cn': 'config', 'alwaysrecordlogin': 'yes', }) except ldap.ALREADY_EXISTS: ap_config = ap_configs.get('config') ap_config.replace('alwaysrecordlogin', 'yes') return ap_config @pytest.fixture(scope="module") def setup_test_user(topology_st, setup_account_policy_plugin): inst = topology_st[0] USER_PW = 'password' # Add a test user entry users = UserAccounts(inst, DEFAULT_SUFFIX) user = users.create_test_user(uid=1000, gid=2000) user.replace('userPassword', USER_PW) return user def pwacc_lock(topology_st, suffix, subtree, userid, nousrs): """Lockout user account by attempting invalid password binds""" log.info('Lockout user account by attempting invalid password binds') while (nousrs > 0): usrrdn = '{}{}'.format(userid, nousrs) userdn = 'uid={},{},{}'.format(usrrdn, subtree, suffix) user = UserAccount(topology_st.standalone, dn=userdn) for i in range(3): with pytest.raises(ldap.INVALID_CREDENTIALS): user.bind(INVL_PASW) log.error('No invalid credentials error for User {}'.format(userdn)) with pytest.raises(ldap.CONSTRAINT_VIOLATION): user.bind(USER_PASW) log.error('User {} is not locked, expected error 19'.format(userdn)) nousrs = nousrs - 1 time.sleep(1) def userpw_reset(topology_st, suffix, subtree, userid, nousrs, bindusr, bindpw, newpasw): """Reset user password""" while (nousrs > 0): usrrdn = '{}{}'.format(userid, nousrs) userdn = 'uid={},{},{}'.format(usrrdn, subtree, suffix) user = UserAccount(topology_st.standalone, dn=userdn) log.info('Reset user password for user-{}'.format(userdn)) if (bindusr == "DirMgr"): try: user.replace('userPassword', newpasw) except ldap.LDAPError as e: log.error('Unable to reset userPassword for user-{}'.format(userdn)) raise e elif (bindusr == "RegUsr"): user_conn = user.bind(bindpw) try: user_conn.replace('userPassword', newpasw) except ldap.LDAPError as e: log.error('Unable to reset userPassword for user-{}'.format(userdn)) raise e nousrs = nousrs - 1 time.sleep(1) def nsact_inact(topology_st, suffix, subtree, userid, nousrs, command, expected): """Account activate/in-activate/status using dsidm""" log.info('Account activate/in-activate/status using dsidm') while (nousrs > 0): usrrdn = '{}{}'.format(userid, nousrs) userdn = 'uid={},{},{}'.format(usrrdn, subtree, suffix) log.info('Running {} for user {}'.format(command, userdn)) dsidm_cmd = ['%s/dsidm' % topology_st.standalone.get_sbin_dir(), 'slapd-standalone1', '-b', DEFAULT_SUFFIX, 'account', command, userdn] log.info('Running {} for user {}'.format(dsidm_cmd, userdn)) try: output = subprocess.check_output(dsidm_cmd) except subprocess.CalledProcessError as err: output = err.output log.info('output: {}'.format(output)) assert ensure_bytes(expected) in output nousrs = nousrs - 1 time.sleep(1) def modify_attr(topology_st, base_dn, attr_name, attr_val): """Modify attribute value for a given DN""" log.info('Modify attribute value for a given DN') try: entry = UserAccount(topology_st.standalone, dn=base_dn) entry.replace(attr_name, attr_val) except ldap.LDAPError as e: log.error('Failed to replace lastLoginTime attribute for user-{} {}'.format(userdn, e.message['desc'])) assert False time.sleep(1) def check_attr(topology_st, suffix, subtree, userid, nousrs, attr_name): """Check ModifyTimeStamp attribute present for user""" log.info('Check ModifyTimeStamp attribute present for user') while (nousrs > 0): usrrdn = '{}{}'.format(userid, nousrs) userdn = 'uid={},{},{}'.format(usrrdn, subtree, suffix) user = UserAccount(topology_st.standalone, dn=userdn) try: user.get_attr_val(attr_name) except ldap.LDAPError as e: log.error('ModifyTimeStamp attribute is not present for user-{} {}'.format(userdn, e.message['desc'])) assert False nousrs = nousrs - 1 def add_time_attr(topology_st, suffix, subtree, userid, nousrs, attr_name): """Enable account by replacing lastLoginTime/createTimeStamp/ModifyTimeStamp attribute""" new_attr_val = time.strftime("%Y%m%d%H%M%S", time.gmtime()) + 'Z' log.info('Enable account by replacing lastLoginTime/createTimeStamp/ModifyTimeStamp attribute') while (nousrs > 0): usrrdn = '{}{}'.format(userid, nousrs) userdn = 'uid={},{},{}'.format(usrrdn, subtree, suffix) user = UserAccount(topology_st.standalone, dn=userdn) try: user.replace(attr_name, new_attr_val) except ldap.LDAPError as e: log.error('Failed to add/replace {} attribute to-{}, for user-{}'.format(attr_name, new_attr_val, userdn)) raise e nousrs = nousrs - 1 time.sleep(1) time.sleep(1) def modusr_attr(topology_st, suffix, subtree, userid, nousrs, attr_name, attr_value): """Enable account by replacing cn attribute value, value of modifyTimeStamp changed""" log.info('Enable account by replacing cn attribute value, value of modifyTimeStamp changed') while (nousrs > 0): usrrdn = '{}{}'.format(userid, nousrs) userdn = 'uid={},{},{}'.format(usrrdn, subtree, suffix) user = UserAccount(topology_st.standalone, dn=userdn) try: user.replace(attr_name, attr_value) except ldap.LDAPError as e: log.error('Failed to add/replace {} attribute to-{}, for user-{}'.format(attr_name, attr_value, userdn)) raise e nousrs = nousrs - 1 time.sleep(1) def del_time_attr(topology_st, suffix, subtree, userid, nousrs, attr_name): """Delete lastLoginTime/createTimeStamp/ModifyTimeStamp attribute from user account""" log.info('Delete lastLoginTime/createTimeStamp/ModifyTimeStamp attribute from user account') while (nousrs > 0): usrrdn = '{}{}'.format(userid, nousrs) userdn = 'uid={},{},{}'.format(usrrdn, subtree, suffix) user = UserAccount(topology_st.standalone, dn=userdn) try: user.remove_all(attr_name) except ldap.LDAPError as e: log.error('Failed to delete {} attribute for user-{}'.format(attr_name, userdn)) raise e nousrs = nousrs - 1 time.sleep(1) def add_users(topology_st, suffix, subtree, userid, nousrs, ulimit): """Add users to default test instance with given suffix, subtree, userid and nousrs""" log.info('add_users: Pass all of these as parameters suffix, subtree, userid and nousrs') users = UserAccounts(topology_st.standalone, suffix, rdn=subtree) while (nousrs > ulimit): usrrdn = '{}{}'.format(userid, nousrs) user_properties = { 'uid': usrrdn, 'cn': usrrdn, 'sn': usrrdn, 'uidNumber': '1001', 'gidNumber': '2001', 'userpassword': USER_PASW, 'homeDirectory': '/home/{}'.format(usrrdn)} users.create(properties=user_properties) nousrs = nousrs - 1 def del_users(topology_st, suffix, subtree, userid, nousrs): """Delete users from default test instance with given suffix, subtree, userid and nousrs""" log.info('del_users: Pass all of these as parameters suffix, subtree, userid and nousrs') users = UserAccounts(topology_st.standalone, suffix, rdn=subtree) while (nousrs > 0): usrrdn = '{}{}'.format(userid, nousrs) userdn = users.get(usrrdn) userdn.delete() nousrs = nousrs - 1 def account_status(topology_st, suffix, subtree, userid, nousrs, ulimit, tochck): """Check account status for the given suffix, subtree, userid and nousrs""" while (nousrs > ulimit): usrrdn = '{}{}'.format(userid, nousrs) userdn = 'uid={},{},{}'.format(usrrdn, subtree, suffix) user = UserAccount(topology_st.standalone, dn=userdn) if (tochck == "Enabled"): try: user.bind(USER_PASW) except ldap.LDAPError as e: log.error('User {} failed to login, expected 0'.format(userdn)) raise e elif (tochck == "Expired"): with pytest.raises(ldap.INVALID_CREDENTIALS): user.bind(USER_PASW) log.error('User {} password not expired , expected error 49'.format(userdn)) elif (tochck == "Disabled"): with pytest.raises(ldap.CONSTRAINT_VIOLATION): user.bind(USER_PASW) log.error('User {} is not inactivated, expected error 19'.format(userdn)) nousrs = nousrs - 1 time.sleep(1) def user_binds(user, user_pw, num_binds): """ Bind as user a number of times """ for i in range(num_binds): userconn = user.bind(user_pw) time.sleep(1) userconn.unbind() def verify_last_login_entries(inst, dn, expected): """ Search for lastLoginHistory attribute and verify the number and order of entries """ entries = inst.search_s(dn, ldap.SCOPE_SUBTREE, "(objectclass=*)", ['lastLoginHistory']) decoded_values = [entry.decode() for entry in entries[0].getValues('lastLoginHistory')] ascending_order = all(decoded_values[i] <= decoded_values[i + 1] for i in range(len(decoded_values) - 1)) assert len(decoded_values) == expected assert ascending_order def test_glact_inact(topology_st, accpol_global): """Verify if user account is inactivated when accountInactivityLimit is exceeded. :id: 342af084-0ad0-442f-b6f6-5a8b8e5e4c28 :setup: Standalone instance, Global account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Add few users to ou=people subtree in the default suffix 2. Check if users are active just before it reaches accountInactivityLimit. 3. User accounts should not be inactivated, expected 0 4. Check if users are inactivated when accountInactivityLimit is exceeded. 5. User accounts should be inactivated, expected error 19. :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Should return error code 19 """ suffix = DEFAULT_SUFFIX subtree = "ou=people" userid = "glinactusr" nousrs = 3 log.info('AccountInactivityLimit set to 12. Account will be inactivated if not accessed in 12 secs') add_users(topology_st, suffix, subtree, userid, nousrs, 0) log.info('Sleep for 10 secs to check if account is not inactivated, expected value 0') time.sleep(10) log.info('Account should not be inactivated since AccountInactivityLimit not exceeded') account_status(topology_st, suffix, subtree, userid, 3, 2, "Enabled") log.info('Sleep for 3 more secs to check if account is inactivated') time.sleep(3) account_status(topology_st, suffix, subtree, userid, 2, 0, "Disabled") log.info('Sleep +10 secs to check if account {}3 is inactivated'.format(userid)) time.sleep(10) account_status(topology_st, suffix, subtree, userid, 3, 2, "Disabled") del_users(topology_st, suffix, subtree, userid, nousrs) def test_glremv_lastlogin(topology_st, accpol_global): """Verify if user account is inactivated by createTimeStamp, if lastLoginTime attribute is missing. :id: 8ded5d8e-ed93-4c22-9c8e-78c479189f84 :setup: Standalone instance, Global account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Add few users to ou=people subtree in the default suffix 2. Wait for few secs and bind as user to create lastLoginTime attribute. 3. Remove the lastLoginTime attribute from the user. 4. Wait till accountInactivityLimit exceeded based on createTimeStamp value 5. Check if users are inactivated, expected error 19. 6. Replace lastLoginTime attribute and check if account is activated 7. User should be activated based on lastLoginTime attribute, expected 0 :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success 6. Success 7. Should return error code 19 """ suffix = DEFAULT_SUFFIX subtree = "ou=people" userid = "nologtimeusr" nousrs = 1 log.info('AccountInactivityLimit set to 12. Account will be inactivated if not accessed in 12 secs') add_users(topology_st, suffix, subtree, userid, nousrs, 0) log.info('Sleep for 6 secs to check if account is not inactivated, expected value 0') time.sleep(6) log.info('Account should not be inactivated since AccountInactivityLimit not exceeded') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") del_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') log.info('Sleep for 7 more secs to check if account is inactivated') time.sleep(7) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") add_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') log.info('Check if account is activated, expected 0') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") del_users(topology_st, suffix, subtree, userid, nousrs) def test_login_history_valid_values(topology_st, setup_test_user, setup_account_policy_plugin): """Verify a user account with attr alwaysrecordlogin=yes returns no more than the last login history size and that the timestamps are in chronological order. :id: 34725a73-c2ba-4b18-9329-532c1514327f :setup: Standalone instance, Global account policy plugin configuration, set alwaysrecordlogin to yes. :steps: 1. Bind as test user more times than lastLoginHistorySize. 2. Search on the test user DN for lastLoginTimeHistory attribute. 3. Verify returned entry contains only LOGIN_HIST_SIZE_FIVE timestamps in chronological order. 4. Modify plugin config entry, setting lastLoginHistorySize to LOGIN_HIST_SIZE_TWO 5. Bind as test user more times than lastLoginHistorySize. 6. Search on the test user DN for lastLoginTimeHistory attribute. 7. Verify returned entry contains only LOGIN_HIST_SIZE_TWO timestamps in chronological order. 8. Modify plugin config entry, setting lastLoginHistorySize to LOGIN_HIST_SIZE_FIVE 9. Search on the test user DN for lastLoginTimeHistory attribute. 10. Verify returned entry contains only LOGIN_HIST_SIZE_FIVE timestamps in chronological order. :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success 6. Success 7. Success 8. Success 9. Success 10. Success """ USER_DN = 'uid=test_user_1000,ou=people,dc=example,dc=com' USER_PW = 'password' LOGIN_HIST_NUM_BINDS_SEVEN = 7 LOGIN_HIST_SIZE_FIVE = 5 LOGIN_HIST_SIZE_TWO = 2 inst = topology_st[0] user = setup_test_user ap_config = setup_account_policy_plugin # Bind as test user more times than lastLoginHistorySize user_binds(user, USER_PW, LOGIN_HIST_NUM_BINDS_SEVEN) # Verify lastLoginTimeHistory attribute returns the correct number of entries in chronological order verify_last_login_entries(inst, USER_DN, LOGIN_HIST_SIZE_FIVE) ap_config.replace('lastLoginHistorySize', str(LOGIN_HIST_SIZE_TWO)) # Bind as test user more times than lastLoginHistorySize user_binds(user, USER_PW, LOGIN_HIST_NUM_BINDS_SEVEN) # Verify lastLoginTimeHistory attribute returns the correct number of entries in chronological order verify_last_login_entries(inst, USER_DN, LOGIN_HIST_SIZE_TWO) # Increase the lastLoginHistorySize to LOGIN_HIST_SIZE_FIVE ap_config.replace('lastLoginHistorySize', str(LOGIN_HIST_SIZE_FIVE)) # Bind as test user more times than lastLoginHistorySize user_binds(user, USER_PW, LOGIN_HIST_NUM_BINDS_SEVEN) # Verify lastLoginTimeHistory attribute returns the correct number of entries in chronological order verify_last_login_entries(inst, USER_DN, LOGIN_HIST_SIZE_FIVE) def test_lastlogin_history_size_zero(topology_st, setup_test_user, setup_account_policy_plugin): """Verify that when lastLoginHistorySize is set to zero, no login history is recorded. :id: c1169b98-ebd9-4fe9-8402-c95f6f80a184 :setup: Standalone instance, Global account policy plugin configuration, set alwaysrecordlogin to yes, and a test user. :steps: 1. Set the lastLoginHistorySize to 0. 2. Bind as the test user more times than the lastLoginHistorySize. 3. Search for the lastLoginTimeHistory attribute on the test user DN. :expectedresults: 1. The lastLoginHistorySize is successfully set to 0. 2. Success. 3. The returned entry has no timestamps, as the size was set to zero. """ USER_DN = 'uid=test_user_1000,ou=people,dc=example,dc=com' USER_PW = 'password' LOGIN_HIST_NUM_BINDS_THREE = 3 LOGIN_HIST_SIZE_ZERO = 0 inst = topology_st[0] user = setup_test_user ap_config = setup_account_policy_plugin # Set lastLoginHistorySize to 0 ap_config.replace('lastLoginHistorySize', str(LOGIN_HIST_SIZE_ZERO)) # Bind as test user more times than lastLoginHistorySize user_binds(user, USER_PW, LOGIN_HIST_NUM_BINDS_THREE) # Verify no entries in lastLoginTimeHistory attribute verify_last_login_entries(inst, USER_DN, LOGIN_HIST_SIZE_ZERO) def test_lastlogin_history_size_negative(topology_st, setup_account_policy_plugin): """Verify that setting the lastLoginHistorySize to a negative number raises an error. :id: 3e3252e0-ad66-4d49-b9a1-3e097f88f2c4 :setup: Standalone instance, Global account policy plugin configuration, set alwaysrecordlogin to yes. :steps: 1. Try to set the lastLoginHistorySize to a negative number. :expectedresults: 1. A warning messge has been written to the error logs. """ LOGIN_HIST_SIZE_NEGATIVE = -1 AC_POL_CFG_DN = "cn=config,cn=Account Policy Plugin,cn=plugins,cn=config" inst = topology_st[0] ap_config = setup_account_policy_plugin # Try to set lastLoginHistorySize to negative ap_config.replace('lastLoginHistorySize', str(LOGIN_HIST_SIZE_NEGATIVE)) assert inst.searchErrorsLog("Invalid value for login-history-size: -1") def test_lastlogin_history_size_non_integer(topology_st, setup_account_policy_plugin): """Verify that setting the lastLoginHistorySize to a non-integer value raises an error. :id: 460e17a0-4d76-4c1e-94e8-a09e185b4dca :setup: Standalone instance, Global account policy plugin configuration, set alwaysrecordlogin to yes. :steps: 1. Try to set the lastLoginHistorySize to a non-integer value. :expectedresults: 1. An ldap.INVALID_SYNTAX error is raised. """ LOGIN_HIST_SIZE_NON_INTEGER = 'five' ap_config = setup_account_policy_plugin # Try to set lastLoginHistorySize to a non-integer with pytest.raises(ldap.INVALID_SYNTAX): ap_config.replace('lastLoginHistorySize', str(LOGIN_HIST_SIZE_NON_INTEGER)) def test_glact_login(topology_st, accpol_global): """Verify if user account can be activated by replacing the lastLoginTime attribute. :id: f89897cc-c13e-4824-af08-3dd1039bab3c :setup: Standalone instance, Global account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Add few users to ou=groups subtree in the default suffix 2. Wait till accountInactivityLimit exceeded 3. Run ldapsearch as normal user, expected error 19. 4. Replace the lastLoginTime attribute and check if account is activated 5. Run ldapsearch as normal user, expected 0. :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success """ suffix = DEFAULT_SUFFIX subtree = "ou=groups" userid = "glactusr" nousrs = 3 log.info('AccountInactivityLimit set to 12. Account will be inactivated if not accessed in 12 secs') add_users(topology_st, suffix, subtree, userid, nousrs, 0) log.info('Sleep for 13 secs to check if account is inactivated, expected error 19') time.sleep(13) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") add_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') log.info('Check if account is activated, expected 0') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") del_users(topology_st, suffix, subtree, userid, nousrs) def test_glinact_limit(topology_st, accpol_global): """Verify if account policy plugin functions well when changing accountInactivityLimit value. :id: 7fbc373f-a3d7-4774-8d34-89b057c5e74b :setup: Standalone instance, Global account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Add few users to ou=groups subtree in the default suffix 2. Check if users are active just before reaching accountInactivityLimit 3. Modify AccountInactivityLimit to a bigger value 4. Wait for additional few secs, but check users before it reaches accountInactivityLimit 5. Wait till accountInactivityLimit exceeded and check users, expected error 19 6. Modify accountInactivityLimit to use the min value. 7. Add few users to ou=groups subtree in the default suffix 8. Wait till it reaches accountInactivityLimit and check users, expected error 19 9. Modify accountInactivityLimit to 10 times(30 secs) bigger than the initial value. 10. Add few users to ou=groups subtree in the default suffix 11. Wait for 90 secs and check if account is not inactivated, expected 0 12. Wait for +27 secs and check if account is not inactivated, expected 0 13. Wait for +30 secs and check if account is inactivated, error 19 14. Replace the lastLoginTime attribute and check if account is activated 15. Modify accountInactivityLimit to 12 secs, which is the default 16. Run ldapsearch as normal user, expected 0. :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success 6. Success 7. Success 8. Success 9. Success 10. Success 11. Success 12. Success 13. Success 14. Success 15. Success 16. Success """ suffix = DEFAULT_SUFFIX subtree = "ou=groups" userid = "inactestusr" nousrs = 3 log.info('AccountInactivityLimit set to 12. Account will be inactivated if not accessed in 12 secs') add_users(topology_st, suffix, subtree, userid, nousrs, 2) log.info('Sleep for 9 secs to check if account is not inactivated, expected 0') time.sleep(9) account_status(topology_st, suffix, subtree, userid, nousrs, 2, "Enabled") modify_attr(topology_st, ACCP_CONF, 'accountInactivityLimit', '20') time.sleep(17) account_status(topology_st, suffix, subtree, userid, nousrs, 2, "Enabled") time.sleep(20) account_status(topology_st, suffix, subtree, userid, nousrs, 2, "Disabled") modify_attr(topology_st, ACCP_CONF, 'accountInactivityLimit', '1') add_users(topology_st, suffix, subtree, userid, 2, 1) time.sleep(2) account_status(topology_st, suffix, subtree, userid, 2, 1, "Disabled") modify_attr(topology_st, ACCP_CONF, 'accountInactivityLimit', '30') add_users(topology_st, suffix, subtree, userid, 1, 0) time.sleep(27) account_status(topology_st, suffix, subtree, userid, 1, 0, "Enabled") time.sleep(30) account_status(topology_st, suffix, subtree, userid, 1, 0, "Disabled") log.info('Check if account is activated, expected 0') add_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") modify_attr(topology_st, ACCP_CONF, 'accountInactivityLimit', '12') del_users(topology_st, suffix, subtree, userid, nousrs) #unstable or unstatus tests, skipped for now @pytest.mark.flaky(max_runs=2, min_passes=1) def test_glnologin_attr(topology_st, accpol_global): """Verify if user account is inactivated based on createTimeStamp attribute, no lastLoginTime attribute present :id: 3032f670-705d-4f69-96f5-d75445cffcfb :setup: Standalone instance, Local account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Configure Global account policy plugin with createTimestamp as stateattrname 2. lastLoginTime attribute will not be effective. 3. Add few users to ou=groups subtree in the default suffix 4. Wait for 10 secs and check if account is not inactivated, expected 0 5. Modify AccountInactivityLimit to 20 secs 6. Wait for +9 secs and check if account is not inactivated, expected 0 7. Wait for +3 secs and check if account is inactivated, error 19 8. Modify accountInactivityLimit to 3 secs 9. Add few users to ou=groups subtree in the default suffix 10. Wait for 3 secs and check if account is inactivated, error 19 11. Modify accountInactivityLimit to 30 secs 12. Add few users to ou=groups subtree in the default suffix 13. Wait for 90 secs and check if account is not inactivated, expected 0 14. Wait for +28 secs and check if account is not inactivated, expected 0 15. Wait for +2 secs and check if account is inactivated, error 19 16. Replace the lastLoginTime attribute and check if account is activated 17. Modify accountInactivityLimit to 12 secs, which is the default 18. Run ldapsearch as normal user, expected 0. :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success 6. Success 7. Success 8. Success 9. Success 10. Success 11. Success 12. Success 13. Success 14. Success 15. Success 16. Success 17. Success 18. Success """ suffix = DEFAULT_SUFFIX subtree = "ou=groups" userid = "nologinusr" nousrs = 3 log.info('AccountInactivityLimit set to 12. Account will be inactivated if not accessed in 12 secs') log.info('Set attribute StateAttrName to createTimestamp, loginTime attr wont be considered') modify_attr(topology_st, ACCP_CONF, 'stateattrname', 'createTimestamp') topology_st.standalone.restart(timeout=10) add_users(topology_st, suffix, subtree, userid, nousrs, 2) log.info('Sleep for 9 secs to check if account is not inactivated, expected 0') time.sleep(9) account_status(topology_st, suffix, subtree, userid, nousrs, 2, "Enabled") modify_attr(topology_st, ACCP_CONF, 'accountInactivityLimit', '20') time.sleep(9) account_status(topology_st, suffix, subtree, userid, nousrs, 2, "Enabled") time.sleep(3) account_status(topology_st, suffix, subtree, userid, nousrs, 2, "Disabled") modify_attr(topology_st, ACCP_CONF, 'accountInactivityLimit', '3') add_users(topology_st, suffix, subtree, userid, 2, 1) time.sleep(2) account_status(topology_st, suffix, subtree, userid, 2, 1, "Enabled") time.sleep(2) account_status(topology_st, suffix, subtree, userid, 2, 1, "Disabled") modify_attr(topology_st, ACCP_CONF, 'accountInactivityLimit', '30') add_users(topology_st, suffix, subtree, userid, 1, 0) time.sleep(28) account_status(topology_st, suffix, subtree, userid, 1, 0, "Enabled") time.sleep(2) account_status(topology_st, suffix, subtree, userid, 1, 0, "Disabled") modify_attr(topology_st, ACCP_CONF, 'accountInactivityLimit', '12') log.info('Set attribute StateAttrName to lastLoginTime, the default') modify_attr(topology_st, ACCP_CONF, 'stateattrname', 'lastLoginTime') topology_st.standalone.restart(timeout=10) add_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') log.info('Check if account is activated, expected 0') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") del_users(topology_st, suffix, subtree, userid, nousrs) #unstable or unstatus tests, skipped for now @pytest.mark.flaky(max_runs=2, min_passes=1) def test_glnoalt_stattr(topology_st, accpol_global): """Verify if user account can be inactivated based on lastLoginTime attribute, altstateattrname set to 1.1 :id: 8dcc3540-578f-422a-bb44-28c2cf20dbcd :setup: Standalone instance, Global account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Configure Global account policy plugin with altstateattrname to 1.1 2. Add few users to ou=groups subtree in the default suffix 3. Wait till it reaches accountInactivityLimit 4. Remove lastLoginTime attribute from the user entry 5. Run ldapsearch as normal user, expected 0. no lastLoginTime attribute present 6. Wait till it reaches accountInactivityLimit and check users, expected error 19 :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success 6. Success """ suffix = DEFAULT_SUFFIX subtree = "ou=groups" userid = "nologinusr" nousrs = 3 log.info('Set attribute altStateAttrName to 1.1') modify_attr(topology_st, ACCP_CONF, 'altstateattrname', '1.1') topology_st.standalone.restart(timeout=10) add_users(topology_st, suffix, subtree, userid, nousrs, 0) log.info('Sleep for 13 secs to check if account is not inactivated, expected 0') time.sleep(13) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") log.info('lastLoginTime attribute is added from the above ldap bind by userdn') time.sleep(13) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") del_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") modify_attr(topology_st, ACCP_CONF, 'altstateattrname', 'createTimestamp') topology_st.standalone.restart(timeout=10) add_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") del_users(topology_st, suffix, subtree, userid, nousrs) #unstable or unstatus tests, skipped for now @pytest.mark.flaky(max_runs=2, min_passes=1) def test_glattr_modtime(topology_st, accpol_global): """Verify if user account can be inactivated based on modifyTimeStamp attribute :id: 67380839-2966-45dc-848a-167a954153e1 :setup: Standalone instance, Global account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Configure Global account policy plugin with altstateattrname to modifyTimestamp 2. Add few users to ou=groups subtree in the default suffix 3. Wait till the accountInactivityLimit exceeded and check users, expected error 19 4. Modify cn attribute for user, ModifyTimeStamp is updated. 5. Check if user is activated based on ModifyTimeStamp attribute, expected 0 6. Change the plugin to use createTimeStamp and remove lastLoginTime attribute 7. Check if account is inactivated, expected error 19 :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success 6. Success 7. Success """ suffix = DEFAULT_SUFFIX subtree = "ou=groups" userid = "modtimeusr" nousrs = 3 log.info('Set attribute altStateAttrName to modifyTimestamp') modify_attr(topology_st, ACCP_CONF, 'altstateattrname', 'modifyTimestamp') topology_st.standalone.restart(timeout=10) add_users(topology_st, suffix, subtree, userid, nousrs, 0) log.info('Sleep for 13 secs to check if account is inactivated, expected 0') time.sleep(13) check_attr(topology_st, suffix, subtree, userid, nousrs, "modifyTimeStamp=*") account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") attr_name = "cn" attr_value = "cnewusr" modusr_attr(topology_st, suffix, subtree, userid, nousrs, attr_name, attr_value) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") modify_attr(topology_st, ACCP_CONF, 'altstateattrname', 'createTimestamp') del_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') topology_st.standalone.restart(timeout=10) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") add_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") del_users(topology_st, suffix, subtree, userid, nousrs) #unstable or unstatus tests, skipped for now @pytest.mark.flaky(max_runs=2, min_passes=1) def test_glnoalt_nologin(topology_st, accpol_global): """Verify if account policy plugin works if we set altstateattrname set to 1.1 and alwaysrecordlogin to NO :id: 49eda7db-84de-47ba-8f81-ac5e4de3a500 :setup: Standalone instance, Global account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Configure Global account policy plugin with altstateattrname to 1.1 2. Set alwaysrecordlogin to NO. 3. Add few users to ou=groups subtree in the default suffix 4. Wait till accountInactivityLimit exceeded and check users, expected 0 5. Check for lastLoginTime attribute, it should not be present 6. Wait for few more secs and check if account is not inactivated, expected 0 7. Run ldapsearch as normal user, expected 0. no lastLoginTime attribute present 8. Set altstateattrname to createTimeStamp 9. Check if user account is inactivated based on createTimeStamp attribute. 10. Account should be inactivated, expected error 19 :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success 6. Success 7. Success 8. Success 9. Success 10. Success """ suffix = DEFAULT_SUFFIX subtree = "ou=groups" userid = "norecrodlogusr" nousrs = 3 log.info('Set attribute altStateAttrName to 1.1') modify_attr(topology_st, ACCP_CONF, 'altstateattrname', '1.1') log.info('Set attribute alwaysrecordlogin to No') modify_attr(topology_st, ACCP_CONF, 'alwaysrecordlogin', 'no') topology_st.standalone.restart(timeout=10) add_users(topology_st, suffix, subtree, userid, nousrs, 0) log.info('Sleep for 13 secs to check if account is not inactivated, expected 0') time.sleep(13) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") time.sleep(3) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") log.info('Set attribute altStateAttrName to createTimestamp') modify_attr(topology_st, ACCP_CONF, 'altstateattrname', 'createTimestamp') topology_st.standalone.restart(timeout=10) time.sleep(2) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") log.info('Reset the default attribute values') modify_attr(topology_st, ACCP_CONF, 'alwaysrecordlogin', 'yes') topology_st.standalone.restart(timeout=10) add_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") del_users(topology_st, suffix, subtree, userid, nousrs) #unstable or unstatus tests, skipped for now @pytest.mark.flaky(max_runs=2, min_passes=1) def test_glinact_nsact(topology_st, accpol_global): """Verify if user account can be activated using dsidm. :id: 876a7a7c-0b3f-4cd2-9b45-1dc80846e334 :setup: Standalone instance, Global account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Configure Global account policy plugin 2. Add few users to ou=groups subtree in the default suffix 3. Wait for 3 seconds 4. Check that trying to unlock the account fails 5. Sleep for 10 seconds so the account becomes inactivated 6. Verify account is inactive BEFORE unlocking 7. Unlock account 8. Replace the lastLoginTime attribute 9. Check the account is now active :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success 6. Success 7. Success 8. Success 9. Success """ suffix = DEFAULT_SUFFIX subtree = "ou=groups" userid = "nsactusr" nousrs = 1 log.info('AccountInactivityLimit set to 12. Account will be inactivated if not accessed in 12 secs') add_users(topology_st, suffix, subtree, userid, nousrs, 0) log.info('Sleep for 3 secs to check if account is not inactivated') time.sleep(3) log.info('Try to unlock account that is still active, should fail') nsact_inact(topology_st, suffix, subtree, userid, nousrs, "unlock", "") log.info('Sleep for 10 secs so the account becomes inactivated') time.sleep(10) log.info('Verify account is inactive BEFORE unlocking') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") nsact_inact(topology_st, suffix, subtree, userid, nousrs, "entry-status", "inactivity limit exceeded") log.info('Unlock account') nsact_inact(topology_st, suffix, subtree, userid, nousrs, "unlock", "") log.info('Replace the lastLoginTime attribute and check the account is now active') add_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") nsact_inact(topology_st, suffix, subtree, userid, nousrs, "entry-status", "activated") del_users(topology_st, suffix, subtree, userid, nousrs) #unstable or unstatus tests, skipped for now @pytest.mark.flaky(max_runs=2, min_passes=1) def test_glinact_acclock(topology_st, accpol_global): """Verify if user account is activated when account is unlocked by passwordlockoutduration. :id: 43601a61-065c-4c80-a7c2-e4f6ae17beb8 :setup: Standalone instance, Global account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Add few users to ou=groups subtree in the default suffix 2. Wait for few secs and attempt invalid binds for user 3. User account should be locked based on Account Lockout policy. 4. Wait till accountInactivityLimit exceeded and check users, expected error 19 5. Wait for passwordlockoutduration and check if account is active 6. Check if account is unlocked, expected error 19, since account is inactivated 7. Replace the lastLoginTime attribute and check users, expected 0 :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success 6. Success 7. Success """ suffix = DEFAULT_SUFFIX subtree = "ou=groups" userid = "pwlockusr" nousrs = 1 log.info('AccountInactivityLimit set to 12. Account will be inactivated if not accessed in 12 secs') add_users(topology_st, suffix, subtree, userid, nousrs, 0) log.info('Sleep for 3 secs and try invalid binds to lockout the user') time.sleep(3) pwacc_lock(topology_st, suffix, subtree, userid, nousrs) log.info('Sleep for 10 secs to check if account is inactivated, expected value 19') time.sleep(10) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") log.info('Add lastLoginTime to activate the user account') add_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") log.info('Checking if account is unlocked after passwordlockoutduration, but inactivated after accountInactivityLimit') pwacc_lock(topology_st, suffix, subtree, userid, nousrs) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") log.info('Account is expected to be unlocked after 5 secs of passwordlockoutduration') time.sleep(5) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") log.info('Sleep 13s and check if account inactivated based on accountInactivityLimit, expected 19') time.sleep(13) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") del_users(topology_st, suffix, subtree, userid, nousrs) #unstable or unstatus tests, skipped for now @pytest.mark.flaky(max_runs=2, min_passes=1) def test_glnact_pwexp(topology_st, accpol_global): """Verify if user account is activated when password is reset after password is expired :id: 3bb97992-101a-4e5a-b60a-4cc21adcc76e :setup: Standalone instance, Global account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Add few users to ou=groups subtree in the default suffix 2. Set passwordmaxage to few secs 3. Wait for passwordmaxage to reach and check if password expired 4. Run ldapsearch as normal user, expected error 19. 5. Reset the password for user account 6. Wait till accountInactivityLimit exceeded and check users 7. Run ldapsearch as normal user, expected error 19. 8. Replace the lastLoginTime attribute and check if account is activated 9. Run ldapsearch as normal user, expected 0. :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success 6. Success 7. Success 8. Success 9. Success """ suffix = DEFAULT_SUFFIX subtree = "ou=groups" userid = "pwexpusr" nousrs = 1 try: topology_st.standalone.config.set('passwordmaxage', '9') except ldap.LDAPError as e: log.error('Failed to change the value of passwordmaxage to 9') raise e log.info('AccountInactivityLimit set to 12. Account will be inactivated if not accessed in 12 secs') log.info('Passwordmaxage is set to 9. Password will expire in 9 secs') add_users(topology_st, suffix, subtree, userid, nousrs, 0) log.info('Sleep for 9 secs and check if password expired') time.sleep(9) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Expired") time.sleep(4) # Passed inactivity account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") log.info('Add lastLoginTime to activate the user account') add_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Expired") userpw_reset(topology_st, suffix, subtree, userid, nousrs, "DirMgr", PASSWORD, USER_PASW) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") # Allow password to expire again, but inactivity continues time.sleep(7) # reset password to counter expiration, we will test expiration again later userpw_reset(topology_st, suffix, subtree, userid, nousrs, "DirMgr", PASSWORD, USER_PASW) log.info('Sleep for 4 secs and check if account is now inactivated, expected error 19') time.sleep(4) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") userpw_reset(topology_st, suffix, subtree, userid, nousrs, "DirMgr", PASSWORD, USER_PASW) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") # Reset inactivity and check for expiration add_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") time.sleep(8) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Expired") # Reset account userpw_reset(topology_st, suffix, subtree, userid, nousrs, "DirMgr", PASSWORD, USER_PASW) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") # Reset maxage try: topology_st.standalone.config.set('passwordmaxage', '400') except ldap.LDAPError as e: log.error('Failed to change the value of passwordmaxage to 400') raise e del_users(topology_st, suffix, subtree, userid, nousrs) #unstable or unstatus tests, skipped for now @pytest.mark.flaky(max_runs=2, min_passes=1) def test_locact_inact(topology_st, accpol_local): """Verify if user account is inactivated when accountInactivityLimit is exceeded. :id: 02140e36-79eb-4d88-ba28-66478689289b :setup: Standalone instance, ou=people subtree configured for Local account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Add few users to ou=people subtree in the default suffix 2. Wait for few secs before it reaches accountInactivityLimit and check users. 3. Run ldapsearch as normal user, expected 0 4. Wait till accountInactivityLimit is exceeded 5. Run ldapsearch as normal user and check if its inactivated, expected error 19. 6. Replace user's lastLoginTime attribute and check if its activated, expected 0 :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success 6. Should return error code 19 """ suffix = DEFAULT_SUFFIX subtree = "ou=people" userid = "inactusr" nousrs = 3 log.info('AccountInactivityLimit set to 10. Account will be inactivated if not accessed in 10 secs') add_users(topology_st, suffix, subtree, userid, nousrs, 0) log.info('Sleep for 9 secs to check if account is not inactivated, expected value 0') time.sleep(9) log.info('Account should not be inactivated since AccountInactivityLimit not exceeded') account_status(topology_st, suffix, subtree, userid, 3, 2, "Enabled") log.info('Sleep for 2 more secs to check if account is inactivated') time.sleep(2) account_status(topology_st, suffix, subtree, userid, 2, 0, "Disabled") log.info('Sleep +9 secs to check if account {}3 is inactivated'.format(userid)) time.sleep(9) account_status(topology_st, suffix, subtree, userid, 3, 2, "Disabled") log.info('Add lastLoginTime attribute to all users and check if its activated') add_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") del_users(topology_st, suffix, subtree, userid, nousrs) #unstable or unstatus tests, skipped for now @pytest.mark.flaky(max_runs=2, min_passes=1) def test_locinact_modrdn(topology_st, accpol_local): """Verify if user account is inactivated when moved from ou=groups to ou=people subtree. :id: 5f25bea3-fab0-4db4-b43d-2d47cc6e5ad1 :setup: Standalone instance, ou=people subtree configured for Local account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Add few users to ou=groups subtree in the default suffix 2. Plugin configured to ou=people subtree only. 3. Wait for few secs before it reaches accountInactivityLimit and check users. 4. Run ldapsearch as normal user, expected 0 5. Wait till accountInactivityLimit exceeded 6. Move users from ou=groups subtree to ou=people subtree 7. Check if users are inactivated, expected error 19 :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success 6. Success 7. Should return error code 0 and 19 """ suffix = DEFAULT_SUFFIX subtree = "ou=groups" userid = "nolockusr" nousrs = 1 log.info('Account should not be inactivated since the subtree is not configured') add_users(topology_st, suffix, subtree, userid, nousrs, 0) log.info('Sleep for 11 secs to check if account is not inactivated, expected value 0') time.sleep(11) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") log.info('Moving users from ou=groups to ou=people subtree') user = UserAccount(topology_st.standalone, dn='uid=nolockusr1,ou=groups,dc=example,dc=com') try: user.rename('uid=nolockusr1', newsuperior='ou=people,dc=example,dc=com') except ldap.LDAPError as e: log.error('Failed to move user uid=nolockusr1 from ou=groups to ou=people') raise e subtree = "ou=people" log.info('Then wait for 11 secs and check if entries are inactivated') time.sleep(11) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") add_time_attr(topology_st, suffix, subtree, userid, nousrs, 'lastLoginTime') account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Enabled") del_users(topology_st, suffix, subtree, userid, nousrs) def test_locact_modrdn(topology_st, accpol_local): """Verify if user account is inactivated when users moved from ou=people to ou=groups subtree. :id: e821cbae-bfc3-40d3-947d-b228c809987f :setup: Standalone instance, ou=people subtree configured for Local account policy plugin configuration, set accountInactivityLimit to few secs. :steps: 1. Add few users to ou=people subtree in the default suffix 2. Wait for few secs and check if users not inactivated, expected 0. 3. Move users from ou=people to ou=groups subtree 4. Wait till accountInactivityLimit is exceeded 5. Check if users are active in ou=groups subtree, expected 0 :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success """ suffix = DEFAULT_SUFFIX subtree = "ou=people" userid = "lockusr" nousrs = 1 log.info('Account should be inactivated since the subtree is configured') add_users(topology_st, suffix, subtree, userid, nousrs, 0) log.info('Sleep for 11 secs to check if account is inactivated, expected value 19') time.sleep(11) account_status(topology_st, suffix, subtree, userid, nousrs, 0, "Disabled") log.info('Moving users from ou=people to ou=groups subtree') user = UserAccount(topology_st.standalone, dn='uid=lockusr1,ou=people,dc=example,dc=com') try: user.rename('uid=lockusr1', newsuperior='ou=groups,dc=example,dc=com') except ldap.LDAPError as e: log.error('Failed to move user uid=lockusr1 from ou=people to ou=groups') raise e log.info('Sleep for +2 secs and check users from both ou=people and ou=groups subtree') time.sleep(2) subtree = "ou=groups" account_status(topology_st, suffix, subtree, userid, 1, 0, "Enabled") del_users(topology_st, suffix, subtree, userid, nousrs) def test_acct_policy_consumer(topology_m1c1, request): """Test the lastLoginHistory is updated on consumer without referral error :id: 53a9a2c7-6b10-41c9-b9f9-bde412d04acb :setup: Supplier Instance, Consumer Instance :steps: 1. Create a test entry on the supplier 2. Configure lastLoginTime on supplier and consumer 3. On supplier 3 binds of the test entry 4. On supplier check there is 3 lastLoginHistory values 5. On supplier check there is no error in error logs 6. On consumer 3 binds of the test entry 7. On consumer check there is 3 lastLoginHistory values 8. On consumer check there is no error in error logs :expectedresults: 1. Success 2. Success 3. Success 4. Success 5. Success 6. Success 7. Success 8. Success """ supplier = topology_m1c1.ms['supplier1'] consumer = topology_m1c1.cs['consumer1'] USER_PW = 'password' # Add on the supplier a test user entry and wait it is on the consumer users_supplier = UserAccounts(supplier, DEFAULT_SUFFIX, rdn=None) user_supplier = users_supplier.create_test_user(uid=1000, gid=2000) user_supplier.replace('userPassword', USER_PW) users_consumer = UserAccounts(consumer, DEFAULT_SUFFIX, rdn=None) for i in range(0, 10): try: user_consumer = users_consumer.get("test_user_1000") break except ldap.NO_SUCH_OBJECT: time.sleep(1) # Configure lastLoginTime on supplier and consumer plugin = AccountPolicyPlugin(supplier) plugin.enable() ACCPOL_DN = "cn={},{}".format(PLUGIN_ACCT_POLICY, DN_PLUGIN) ACCP_CONF = "{},{}".format(DN_CONFIG, ACCPOL_DN) plugin.set('nsslapd-pluginarg0', ACCP_CONF) accp = AccountPolicyConfig(supplier, dn=ACCP_CONF) accp.set('alwaysrecordlogin', 'yes') accp.set('stateattrname', 'lastLoginTime') supplier.restart(timeout=10) plugin = AccountPolicyPlugin(consumer) plugin.enable() ACCPOL_DN = "cn={},{}".format(PLUGIN_ACCT_POLICY, DN_PLUGIN) ACCP_CONF = "{},{}".format(DN_CONFIG, ACCPOL_DN) plugin.set('nsslapd-pluginarg0', ACCP_CONF) accp = AccountPolicyConfig(consumer, dn=ACCP_CONF) accp.set('alwaysrecordlogin', 'yes') accp.set('stateattrname', 'lastLoginTime') consumer.restart(timeout=10) # On supplier # Do 3 binds with a delay to # allow several values lastLoginHistory user_supplier.bind(USER_PW) time.sleep(2) user_supplier = users_supplier.get("test_user_1000") user_supplier.bind(USER_PW) time.sleep(2) user_supplier = users_supplier.get("test_user_1000") user_supplier.bind(USER_PW) time.sleep(2) # Verify there is no referral error results = supplier.ds_error_log.match('.*.acct_update_login_history - Modify error 10 on entry*') assert not results # Verify that we got 3 values for lastLoginHistory assert len(user_supplier.get_attr_vals_utf8_l('lastLoginHistory')) == 3 # On Consumer # Do 3 binds with a delay to # allow several values lastLoginHistory user_supplier.bind(USER_PW) user_consumer.bind(USER_PW) time.sleep(2) user_consumer = users_supplier.get("test_user_1000") user_consumer.bind(USER_PW) time.sleep(2) user_consumer = users_supplier.get("test_user_1000") user_consumer.bind(USER_PW) time.sleep(2) # Verify there is no referral error results = consumer.ds_error_log.match('.*.acct_update_login_history - Modify error 10 on entry*') assert not results # Verify that we got at least 3 values for lastLoginHistory assert len(user_consumer.get_attr_vals_utf8_l('lastLoginHistory')) >= 3 def fin(): user_supplier.delete() log.info('Disabling Global accpolicy plugin and removing pwpolicy attrs') try: plugin = AccountPolicyPlugin(supplier) plugin.disable() except ldap.LDAPError as e: log.error('Failed to disable Global accpolicy plugin, {}'.format(e.message['desc'])) assert False supplier.restart(timeout=10) try: plugin = AccountPolicyPlugin(consumer) plugin.disable() except ldap.LDAPError as e: log.error('Failed to disable Global accpolicy plugin, {}'.format(e.message['desc'])) assert False consumer.restart(timeout=10) request.addfinalizer(fin) if __name__ == '__main__': # Run isolated # -s for DEBUG mode CURRENT_FILE = os.path.realpath(__file__) pytest.main("-s {}".format(CURRENT_FILE))