# --- BEGIN COPYRIGHT BLOCK --- # Copyright (C) 2026 Red Hat, Inc. # All rights reserved. # # License: GPL (version 3 or any later version). # See LICENSE for details. # --- END COPYRIGHT BLOCK --- # import pytest import os import subprocess import distro import time from datetime import * from lib389.config import Encryption from lib389.utils import * from lib389._constants import * from lib389.cli_base import FakeArgs from test389.topologies import topology_st from lib389.cli_ctl.health import health_check_run from lib389.paths import Paths CMD_OUTPUT = 'No issues found.' JSON_OUTPUT = '[]' ds_paths = Paths() libfaketime = pytest.importorskip('libfaketime') libfaketime.reexec_if_needed() log = logging.getLogger(__name__) def run_healthcheck_and_flush_log(topology, instance, searched_code, json, searched_code2=None): args = FakeArgs() args.instance = instance.serverid args.verbose = instance.verbose args.list_errors = False args.list_checks = False args.check = ['config', 'encryption', 'tls', 'fschecks'] args.dry_run = False args.exclude_check = [] if json: log.info('Use healthcheck with --json option') args.json = json health_check_run(instance, topology.logcap.log, args) assert topology.logcap.contains(searched_code) log.info('Healthcheck returned searched code: %s' % searched_code) if searched_code2 is not None: assert topology.logcap.contains(searched_code2) log.info('Healthcheck returned searched code: %s' % searched_code2) else: log.info('Use healthcheck without --json option') args.json = json health_check_run(instance, topology.logcap.log, args) assert topology.logcap.contains(searched_code) log.info('Healthcheck returned searched code: %s' % searched_code) if searched_code2 is not None: assert topology.logcap.contains(searched_code2) log.info('Healthcheck returned searched code: %s' % searched_code2) log.info('Clear the log') topology.logcap.flush() @pytest.mark.xfail(ds_is_older("1.4.1"), reason="Not implemented") def test_healthcheck_insecure_pwd_hash_configured(topology_st): """Check if HealthCheck returns DSCLE0002 code :id: 6baf949c-a5eb-4f4e-83b4-8302e677758a :setup: Standalone instance :steps: 1. Create DS instance 2. Configure an insecure passwordStorageScheme (as SHA) for the instance 3. Use HealthCheck without --json option 4. Use HealthCheck with --json option 5. Set passwordStorageScheme and nsslapd-rootpwstoragescheme to PBKDF2_SHA512 6. Use HealthCheck without --json option 7. Use HealthCheck with --json option :expectedresults: 1. Success 2. Success 3. Healthcheck reports DSCLE0002 code and related details 4. Healthcheck reports DSCLE0002 code and related details 5. Success 6. Healthcheck reports no issue found 7. Healthcheck reports no issue found """ RET_CODE = 'DSCLE0002' standalone = topology_st.standalone log.info('Configure an insecure passwordStorageScheme (SHA)') standalone.config.set('passwordStorageScheme', 'SHA') standalone.stop() try: run_healthcheck_and_flush_log(topology_st, standalone, json=False, searched_code=RET_CODE) run_healthcheck_and_flush_log(topology_st, standalone, json=True, searched_code=RET_CODE) finally: if not standalone.status(): standalone.start() run_healthcheck_and_flush_log(topology_st, standalone, json=False, searched_code=RET_CODE) run_healthcheck_and_flush_log(topology_st, standalone, json=True, searched_code=RET_CODE) log.info('Set passwordStorageScheme and nsslapd-rootpwstoragescheme to PBKDF2-SHA512') standalone.config.set('passwordStorageScheme', 'PBKDF2-SHA512') standalone.config.set('nsslapd-rootpwstoragescheme', 'PBKDF2-SHA512') standalone.stop() try: run_healthcheck_and_flush_log(topology_st, standalone, json=False, searched_code=CMD_OUTPUT) run_healthcheck_and_flush_log(topology_st, standalone, json=True, searched_code=JSON_OUTPUT) finally: if not standalone.status(): standalone.start() run_healthcheck_and_flush_log(topology_st, standalone, json=False, searched_code=CMD_OUTPUT) run_healthcheck_and_flush_log(topology_st, standalone, json=True, searched_code=JSON_OUTPUT) @pytest.mark.xfail(ds_is_older("1.4.1"), reason="Not implemented") def test_healthcheck_min_allowed_tls_version_too_low(topology_st): """Check if HealthCheck returns DSELE0001 code :id: a4be3390-9508-4827-8f82-e4e21081caab :setup: Standalone instance :steps: 1. Create DS instance 2. Set the TLS minimum version to TLS1.0 3. Use HealthCheck without --json option 4. Use HealthCheck with --json option 5. Set the TLS minimum version to TLS1.2 6. Use HealthCheck without --json option 7. Use HealthCheck with --json option :expectedresults: 1. Success 2. Success 3. Healthcheck reports DSELE0001 code and related details 4. Healthcheck reports DSELE0001 code and related details 5. Success 6. Healthcheck reports no issue found 7. Healthcheck reports no issue found """ RET_CODE = 'DSELE0001' HIGHER_VS = 'TLS1.2' SMALL_VS = 'TLS1.0' RHEL = 'Red Hat Enterprise Linux' standalone = topology_st.standalone standalone.enable_tls() # We have to update-crypto-policies to LEGACY, otherwise we can't set TLS1.0 log.info('Updating crypto policies') assert subprocess.check_call(['update-crypto-policies', '--set', 'LEGACY']) == 0 log.info('Set the TLS minimum version to TLS1.0') enc = Encryption(standalone) enc.replace('sslVersionMin', SMALL_VS) standalone.restart() standalone.stop() try: run_healthcheck_and_flush_log(topology_st, standalone, json=False, searched_code=RET_CODE) run_healthcheck_and_flush_log(topology_st, standalone, json=True, searched_code=RET_CODE) finally: if not standalone.status(): standalone.start() run_healthcheck_and_flush_log(topology_st, standalone, json=False, searched_code=RET_CODE) run_healthcheck_and_flush_log(topology_st, standalone, json=True, searched_code=RET_CODE) log.info('Set the TLS minimum version to TLS1.2') enc.replace('sslVersionMin', HIGHER_VS) standalone.restart() standalone.stop() try: run_healthcheck_and_flush_log(topology_st, standalone, json=False, searched_code=CMD_OUTPUT) run_healthcheck_and_flush_log(topology_st, standalone, json=True, searched_code=JSON_OUTPUT) finally: if not standalone.status(): standalone.start() run_healthcheck_and_flush_log(topology_st, standalone, json=False, searched_code=CMD_OUTPUT) run_healthcheck_and_flush_log(topology_st, standalone, json=True, searched_code=JSON_OUTPUT) if RHEL in distro.linux_distribution(): log.info('Set crypto-policies back to DEFAULT') assert subprocess.check_call(['update-crypto-policies', '--set', 'DEFAULT']) == 0 @pytest.mark.xfail(ds_is_older("1.4.1"), reason="Not implemented") def test_healthcheck_resolvconf_bad_file_perm(topology_st): """Check if HealthCheck returns DSPERMLE0001 code :id: 8572b9e9-70e7-49e9-b745-864f6f2468a8 :setup: Standalone instance :steps: 1. Create DS instance 2. Change the /etc/resolv.conf file permissions to 444 3. Use HealthCheck without --json option 4. Use HealthCheck with --json option 5. set /etc/resolv.conf permissions to 644 6. Use HealthCheck without --json option 7. Use HealthCheck with --json option :expectedresults: 1. Success 2. Success 3. Healthcheck reports DSPERMLE0001 code and related details 4. Healthcheck reports DSPERMLE0001 code and related details 5. Success 6. Healthcheck reports no issue found 7. Healthcheck reports no issue found """ RET_CODE = 'DSPERMLE0001' standalone = topology_st.standalone log.info('Change the /etc/resolv.conf file permissions to 444') os.chmod('/etc/resolv.conf', 0o444) standalone.stop() try: run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=False) run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=True) finally: if not standalone.status(): standalone.start() run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=False) run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=True) log.info('Change the /etc/resolv.conf file permissions to 644') os.chmod('/etc/resolv.conf', 0o644) standalone.stop() try: run_healthcheck_and_flush_log(topology_st, standalone, CMD_OUTPUT, json=False) run_healthcheck_and_flush_log(topology_st, standalone, JSON_OUTPUT, json=True) finally: if not standalone.status(): standalone.start() run_healthcheck_and_flush_log(topology_st, standalone, CMD_OUTPUT, json=False) run_healthcheck_and_flush_log(topology_st, standalone, JSON_OUTPUT, json=True) @pytest.mark.xfail(ds_is_older("1.4.1"), reason="Not implemented") def test_healthcheck_pwdfile_bad_file_perm(topology_st): """Check if HealthCheck returns DSPERMLE0002 code :id: ec137d66-bad6-4eed-90bd-fc1d572bbe1f :setup: Standalone instance :steps: 1. Create DS instance 2. Change the /etc/dirsrv/slapd-xxx/pwdfile.txt permissions to 000 3. Use HealthCheck without --json option 4. Use HealthCheck with --json option 5. Change the /etc/dirsrv/slapd-xxx/pwdfile.txt permissions to 400 6. Use HealthCheck without --json option 7. Use HealthCheck with --json option :expectedresults: 1. Success 2. Success 3. Healthcheck reports DSPERMLE0002 code and related details 4. Healthcheck reports DSPERMLE0002 code and related details 5. Success 6. Healthcheck reports no issue found 7. Healthcheck reports no issue found """ RET_CODE = 'DSPERMLE0002' standalone = topology_st.standalone cert_dir = standalone.ds_paths.cert_dir log.info('Change the /etc/dirsrv/slapd-{}/pwdfile.txt permissions to 000'.format(standalone.serverid)) os.chmod('{}/pwdfile.txt'.format(cert_dir), 0o000) standalone.stop() try: run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=False) run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=True) finally: if not standalone.status(): standalone.start() run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=False) run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=True) log.info('Change the /etc/dirsrv/slapd-{}/pwdfile.txt permissions to 400'.format(standalone.serverid)) os.chmod('{}/pwdfile.txt'.format(cert_dir), 0o400) standalone.stop() try: run_healthcheck_and_flush_log(topology_st, standalone, CMD_OUTPUT, json=False) run_healthcheck_and_flush_log(topology_st, standalone, JSON_OUTPUT, json=True) finally: if not standalone.status(): standalone.start() run_healthcheck_and_flush_log(topology_st, standalone, CMD_OUTPUT, json=False) run_healthcheck_and_flush_log(topology_st, standalone, JSON_OUTPUT, json=True) @pytest.mark.xfail(ds_is_older("1.4.1"), reason="Not implemented") def test_healthcheck_certif_expiring_within_30d(topology_st): """Check if HealthCheck returns DSCERTLE0001 code :id: f30b8115-0fd3-4c1d-9f5a-383bea7ea869 :setup: Standalone instance :steps: 1. Create DS instance 2. Use libfaketime to tell the process the date is within 30 days before certificate expiration 3. Use HealthCheck without --json option 4. Use HealthCheck with --json option :expectedresults: 1. Success 2. Success 3. Healthcheck reports DSCERTLE0001 code and related details 4. Healthcheck reports DSCERTLE0001 code and related details """ RET_CODE = 'DSCERTLE0001' standalone = topology_st.standalone standalone.enable_tls() # Cert is valid two years from today, so we count the date that is within 30 days before certificate expiration date_future = datetime.now() + timedelta(days=701) with libfaketime.fake_time(date_future): time.sleep(1) standalone.stop() try: run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=False) run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=True) finally: if not standalone.status(): standalone.start() run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=False) run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=True) # Try again with real time just to make sure no issues were found standalone.stop() try: run_healthcheck_and_flush_log(topology_st, standalone, CMD_OUTPUT, json=False) run_healthcheck_and_flush_log(topology_st, standalone, JSON_OUTPUT, json=True) finally: if not standalone.status(): standalone.start() run_healthcheck_and_flush_log(topology_st, standalone, CMD_OUTPUT, json=False) run_healthcheck_and_flush_log(topology_st, standalone, JSON_OUTPUT, json=True) @pytest.mark.xfail(ds_is_older("1.4.1"), reason="Not implemented") def test_healthcheck_certif_expired(topology_st): """Check if HealthCheck returns DSCERTLE0002 code :id: ceff2c22-62c0-4fd9-b737-930a88458d68 :setup: Standalone instance :steps: 1. Create DS instance 2. Use libfaketime to tell the process the date is after certificate expiration 3. Use HealthCheck without --json option 4. Use HealthCheck with --json option :expectedresults: 1. Success 2. Success 3. Healthcheck reports DSCERTLE0002 code and related details 4. Healthcheck reports DSCERTLE0002 code and related details """ RET_CODE = 'DSCERTLE0002' standalone = topology_st.standalone standalone.enable_tls() # Cert is valid two years from today, so we count the date that is after expiration date_future = datetime.now() + timedelta(days=731) with libfaketime.fake_time(date_future): time.sleep(1) standalone.stop() try: run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=False) run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=True) finally: if not standalone.status(): standalone.start() run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=False) run_healthcheck_and_flush_log(topology_st, standalone, RET_CODE, json=True) # Try again with real time just to make sure no issues were found standalone.stop() try: run_healthcheck_and_flush_log(topology_st, standalone, CMD_OUTPUT, json=False) run_healthcheck_and_flush_log(topology_st, standalone, JSON_OUTPUT, json=True) finally: if not standalone.status(): standalone.start() run_healthcheck_and_flush_log(topology_st, standalone, CMD_OUTPUT, json=False) run_healthcheck_and_flush_log(topology_st, standalone, JSON_OUTPUT, json=True) if __name__ == '__main__': # Run isolated # -s for DEBUG mode CURRENT_FILE = os.path.realpath(__file__)